We have been working closely with our manufacturer in China, and a few weeks ago I submitted some design changes for a 306 similar to the MA306, but with larger intake holes just above the threads on the base of the atomizer. The units that I have tested are awesome!! The draw is incredibly free, and when used with the DCA, it allows for a greater range of draw adjustment, which was our goal. We will have these atomizers up on the site in just a few days!!
- Status
We have been working closely with our manufacturer in China, and a few weeks ago I submitted some design changes for a 306 similar to the MA306, but with larger intake holes just above the threads on the base of the atomizer. The units that I have tested are awesome!! The draw is incredibly free, and when used with the DCA, it allows for a greater range of draw adjustment, which was our goal. We will have these atomizers up on the site in just a few days!!
Yes, we will have more Polished Expansion Packs available when we restock the DCAs next week!
Just sharing a crazy dream...
I was happy... mmm... content, rather... anyway, thing is everything was fine as I had enough stuff at home for a very looong long time; drip tips; atties, you name it... However, last minute I get to notice my 306s would only last me 12 hours... I know, I know, crazy, right? But you know the way dreams work; surreal and that... And so, I had to get at least one more 306 to make it the following day... I went online shopping... As if I was going to get an atty within the following hours here in Argentina, but it felt totally natural in my dream, furthermore, it did make full sense because of an International Hyper Mail option (that was the name and everything; swear! LOL) !!! But the thing is... No stock. No stock. Not a single store was letting me add my 306 to my cart... Suddenly I rememberd -listen to this- that I had left a half-dead Joye somewhere in my car, so I tought I could get it but couldn't find the keys (which I had lost that very day for real, haaa!) so I thought about buying a KEY CHAIN to solve my problem... It sounded dream-natural as I was online shopping and online shopping seemed to be the answer to everything; haaaaa =) ... Anyway, this is where it gets wild...
I remembered about the key chain Cavecom offers; the SD key chain or similar, only to find out there was no stock, and two seconds later it hit me... That key chain from Jawzun's video... Why not? It certainly was waaay too cool...
This was on stock; they offered the International Hyper Mail option and everything and it was a PV itself... 250 mah, but you needed some micro-306 which were claimed not to be very consistant...
Huuuuuuuuuuuuuaaaaaah !!!
I was happy... mmm... content, rather... anyway, thing is everything was fine as I had enough stuff at home for a very looong long time; drip tips; atties, you name it... However, last minute I get to notice my 306s would only last me 12 hours... I know, I know, crazy, right? But you know the way dreams work; surreal and that... And so, I had to get at least one more 306 to make it the following day... I went online shopping... As if I was going to get an atty within the following hours here in Argentina, but it felt totally natural in my dream, furthermore, it did make full sense because of an International Hyper Mail option (that was the name and everything; swear! LOL) !!! But the thing is... No stock. No stock. Not a single store was letting me add my 306 to my cart... Suddenly I rememberd -listen to this- that I had left a half-dead Joye somewhere in my car, so I tought I could get it but couldn't find the keys (which I had lost that very day for real, haaa!) so I thought about buying a KEY CHAIN to solve my problem... It sounded dream-natural as I was online shopping and online shopping seemed to be the answer to everything; haaaaa =) ... Anyway, this is where it gets wild...
I remembered about the key chain Cavecom offers; the SD key chain or similar, only to find out there was no stock, and two seconds later it hit me... That key chain from Jawzun's video... Why not? It certainly was waaay too cool...
This was on stock; they offered the International Hyper Mail option and everything and it was a PV itself... 250 mah, but you needed some micro-306 which were claimed not to be very consistant...
Huuuuuuuuuuuuuaaaaaah !!!
On a more serious and real note now...
Maybe not a full-PV but... What about this... Recycling the key chains and turning those DCAs into tiny juice containers; bottles to carry juice; mini-dripping devices...
I mean, just think about it... How cooooool -and functional even- would that be !?
Maybe not a full-PV but... What about this... Recycling the key chains and turning those DCAs into tiny juice containers; bottles to carry juice; mini-dripping devices...
I mean, just think about it... How cooooool -and functional even- would that be !?
It may even lead to an entire new fashion of drippers' gear...
I'm already picturing myself with a dragon-shaped ring which drips from the beast's mouth... But then again, I am entering dream-mode again, I guess... It's bed time.
=)
PS: At least modify one for me with juice-carrying features and bring it as a souvenir when you visit Argentina any time in the future, Jason, and I will totally compensate that by treating you to the best parrillada ever ... !!!
I'm already picturing myself with a dragon-shaped ring which drips from the beast's mouth... But then again, I am entering dream-mode again, I guess... It's bed time.
=)
PS: At least modify one for me with juice-carrying features and bring it as a souvenir when you visit Argentina any time in the future, Jason, and I will totally compensate that by treating you to the best parrillada ever ... !!!
Last edited:
UPDATE!!
Site completely restocked today 5/5/12 - Use coupon code "CINCODEMAYO" for 10% discount at checkout, this weekend only!!
We have Polished and Black Anodized 306DCAs restocked, expansion packs, and drip tips!!
We have also expanded our 306 atomizer line-up:
GSV306 (LR, bridgeless, w/ FreeFlow)
Our new FreeFlow 306 (LR w/ bridge)
Always awesome MA306 (LR @ 1.5ohm)
And our latest 3.0ohm HV 306 (w/ bridge)
Please feel free to PM with any questions.
Thanks!!
Jawz
PS - Don't forget the DCA key chains too
Site completely restocked today 5/5/12 - Use coupon code "CINCODEMAYO" for 10% discount at checkout, this weekend only!!
We have Polished and Black Anodized 306DCAs restocked, expansion packs, and drip tips!!
We have also expanded our 306 atomizer line-up:
GSV306 (LR, bridgeless, w/ FreeFlow)
Our new FreeFlow 306 (LR w/ bridge)
Always awesome MA306 (LR @ 1.5ohm)
And our latest 3.0ohm HV 306 (w/ bridge)
Please feel free to PM with any questions.
Thanks!!
Jawz
PS - Don't forget the DCA key chains too
Guess the black expansion packs are sold out, at least I snagged a black DCA, driptip, and a few MA306's
Hope its worth it, I've never tried a 306, but like how the DCA looks so thought I'd give it a shot.
Hope its worth it, I've never tried a 306, but like how the DCA looks so thought I'd give it a shot.
Are there any plans for an open center post for the dca I would love to be able to use one with my reo
Doesn't that kinda defeat the purpose. I love my DCAs cause they eliminate leaks.
Although if you could seal the center post to the needle or tube from the feeder.....hmmm? I regress, I think most folks wanting to use feeders with the DCA go for top feeders like the vapemate (which I've been wanting to try myself).
on a reo it would work, I've used a open shorty adaptor with a dripsheild on a extremely leaking atty that was so bad it overflowed the catch cup, but it work great with the dripsheild, and really it could be something as simple as a center pin kit the comes with an open center pin
I don't think I've ever heard Jawsun talk about a bottom fed DCA but I'd say get yourself a center pin kit and give it a go.
Can someone help me? I have a 306 DCA and my atomizer is stuck in the upper sleeve. I didn't force it on tight, but man I can NOT for the life of me pull out the atomizer. Is there any way I can do this without pulling it while connected to my PV? I'd hate to break out the 510 connector. I also don't want to put pliers on the threads of the 306. Does anyone have any tips?
- Status
Similar threads
- Locked
