I took them all the way down on both sizes.
Ohmega Alpha 30mm BFT Tank
- Thread starter BoostAddict
- Start date
- th_trl_thread_readers 0
- Status
I took them all the way down on both sizes.
well I have the 22mm version. not sure the 4mm coils will fit. Ill try tomorrow. So far I have played with 3.5 and 2.5 mm coils. 8 wraps 26g 316l. around .33-.35ohms. wicking with KGD, and when I go over about 50 watts I start getting a scorchy cottony taste. I tried less cotton and it kinda drained my tank via the air holes in about 15 mins. that was nice... more cotton and its hard to get the cotton to stay in the channels. I keep searching for build pics on the 22mm alpha so I can see what others have done, but I am mainly finding the 30mm. Oh well. I keep playing tomorrow. eventually ill get it. It took me about a week and a half to figure out how to build my Aromamizer to get a good vape from it, ill figure this one out.
Oh, man, I nearly asked you if you wanted a pic because I just rewicked
But, I looked at the time you posted and that you had an MT, and figured you had it running by now.
I posted photos in the thread earlier for the 22mm. All the way down to the bottom of the wells. Not sure what wattage you're trying to throw at it but I have only gone to 65 from preference.
I'm only running my 22mm at 50W also. So my wicking may not have helped either.
I'm running the big guy at 95W though.
I'm running the big guy at 95W though.
Well I guess Im running at 61 watts right now... working pretty good. I still get the occasional burny cotton taste. but perhaps I am actually running it a touch to high.
rebuilt with dual parallel 28G kanthal 2.5mm id at .36 ohms. wicked with KGD. running good. still like my MT just a hair more.
well I just had a small coming to jesus meeting with myself... Why Do I always try to run everything at high wattage? My crown and my TFV4 didnt come to life until about 75+ watts, so I always tend to try that with everything else. But this tank seems to shine at lower watts with this build in it. So now Im running it on my PWM mod at about 30% duty cycle. not sure of the watts, but it has great clouds and flavor. Just had to get out of the HIGH POWWA mindset.
Yes, just discovered these Ohmega Tanks a few minutes ago myself. Ohmega Alpha 22mm Tank
I know I would want the 30mm and this Ohmega looks really nice... also for less than half the price of the VCMT... seems like the 22mm would be almost the same thing as my Mutank, which Im happy with so far
No airflow control or juice control on these Ohmegas but I dont care all that much about that I typically run the air flow wide open anyway on all my tanks.
Wondering what would the 30mm look like though atop of my mods? It would undoubtedly hang off the sides with that extra width lol... I dont care about looks though, looking for bang for your buck performance! With the 30mm I could do some 4mm dual coils easy, that would be amazing and a very fun endeavor building coils of that size.
I know I would want the 30mm and this Ohmega looks really nice... also for less than half the price of the VCMT... seems like the 22mm would be almost the same thing as my Mutank, which Im happy with so far
No airflow control or juice control on these Ohmegas but I dont care all that much about that I typically run the air flow wide open anyway on all my tanks.
Wondering what would the 30mm look like though atop of my mods? It would undoubtedly hang off the sides with that extra width lol... I dont care about looks though, looking for bang for your buck performance! With the 30mm I could do some 4mm dual coils easy, that would be amazing and a very fun endeavor building coils of that size.
Which mods do you have? I use mine on an RX200 and there's just a bit of overhang on the front of the mod but it actually looks pretty nice on it regardless.Yes, just discovered these Ohmega Tanks a few minutes ago myself. Ohmega Alpha 22mm Tank
I know I would want the 30mm and this Ohmega looks really nice... also for less than half the price of the VCMT... seems like the 22mm would be almost the same thing as my Mutank, which Im happy with so far
No airflow control or juice control on these Ohmegas but I dont care all that much about that I typically run the air flow wide open anyway on all my tanks.
Wondering what would the 30mm look like though atop of my mods? It would undoubtedly hang off the sides with that extra width lol... I dont care about looks though, looking for bang for your buck performance! With the 30mm I could do some 4mm dual coils easy, that would be amazing and a very fun endeavor building coils of that size.
one big difference I found from the Ohmega Alpha and the MuTank is the space between the barrel and the glass. on the 22mm alpha the space is very narrow. I can see it cooking juice in there pretty easily. also with thicker juices I have had a couple issues where the juice wouldn't wick as well, or air bubbles get trapped there keeping the juice from getting properly to my wicks. My mutank doesnt have this issue as there is a little more space there.
Yeah, the air bubbles are flattened and take awhile to get to the top.
Yeah, I haven't had any issues with the wicking keeping up, but I'm using a diy juice that's either 65 or 70vg. Higher vg makes my chest feel heavy so its unlikely I will ever try higher than that again.
50/50 here most of the time and 30/70vg if I'm feeling froggy that day. I like 50/50 in tanks and 30/70vg in rdas.
- Status
Similar threads
