OHMS to run on a nemesis clone mod

Status
Not open for further replies.

Nconway2709

Full Member
Sep 1, 2014
7
2
United States
I have a nemesis clone mod, not sure of the exact model but its a pinky fired mod, (where you push in with your pinky to complete the circuit to get a hit) I am currently using the Aerotank mega for my tank and the battery inside is a TrustFire IMR 18650 2000mAh 3.7v, my question is what kind of coils do i need for this? I am currently using KangerTech dual coils at 1.5ohms but i want a bigger hit and im pretty sure this MOD is burning them out pretty fast. thank you for any answers ahead of time.
 

Susan~S

ECF Guru
ECF Veteran
Verified Member
Mar 12, 2014
16,937
11,693
68
Mpls/St.Paul, MN
Please consider buying a new battery.

Rule of thumb - avoid batteries with "fire" in the name (trustfire, ultrafire, surefire) these are second rate in realm of quality and safety. The same goes for their charger: Trustfire chargers. WHY are they considered to be so bad?

Check out Baditudes blog for some safe battery options:

Battery Basics for Mods: IMR or Protected ICR?
* Choose the safest and right battery for your applications here. Includes a list of name brand, high-drain, safe-chemistry batteries with mAh & amp ratings in 18350, 18490/18500, and 18650 sizes.
 
Last edited:

Despraci

Super Member
ECF Veteran
Verified Member
May 23, 2014
879
679
Palmyra, PA
I have a nemesis clone mod, not sure of the exact model but its a pinky fired mod, (where you push in with your pinky to complete the circuit to get a hit) I am currently using the Aerotank mega for my tank and the battery inside is a TrustFire IMR 18650 2000mAh 3.7v, my question is what kind of coils do i need for this? I am currently using KangerTech dual coils at 1.5ohms but i want a bigger hit and im pretty sure this MOD is burning them out pretty fast. thank you for any answers ahead of time.

You really should get a new IMR from a reputable maker and supplier. Trustfire batteries you can trust to start a fire. Once you do that I suggest doing some ready on the forums to see which route you many want to go.
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,076
71
Ridgeway, Ohio
Well, first of all you are going to be somewhat limited in the choices of juice delivery devices because you chose a mechanical mod over a regulated variable voltage mod. 1.5 ohm dual coils are about the hardest hitting factory made devices you're going to find. Also check out the Aspire Nautius clearomizer tanks and get the vertical coil replacements with ceramic wicks.

A regulated mod would have allowed you to change the voltage output of the battery for a harder hit at the press of a button. It would also have had built-in protection circuitry to keep you out of trouble should you get a short in your coil, or prevent the fire button auto-firing if you forget to lock it.

Mechanical mods can be dangerous for a new vaper as you're not yet aware of things that can over-tax your battery and cause it to vent. Mechanical mods don't have the processor on board which keep you out of trouble.

First things first. Get a different battery!! Trustfires, Ultrafires, & Surefires are bottom of the barrel ICR chemistry batteries, a chemistry which is considered to be obsolete for using in a mod. ICR batteries can vent flames and possibly explode in a mod.

Get an IMR chemistry battery. These are safe-chemistry, and high-drain batteries. An AW, Panasonic, or Efest 18650 IMR battery is what you should look for. You don't need a 30 amp battery yet like the green Sony's because you are far from ready from trying an RBA, let alone sub-ohm coils. Susan gave you the link to my battery blog; there's a large selection of IMR batteries there.

Mechanical Mod Proper Useage Guide
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread