OK, call me CRAZY! Need ideas for juice feeder for Commercial Mods!

[Sci]

Hey Stormi, take a look at this: 5" METAL POCKET FLASHLIGHT - eBay (item 350350895620 end time May-13-10 10:54:37 PDT).
I've got one of these, I'll post pics tonite. It takes AA batteries, a 3ml bottle fits in it. It would be easy to cut for length with a pipe cutter, I'll see how easy it is to drill & cut also.

 

[CloudBurst]

Cool, I like it!

 

[Scubabatdan]

Cool, I like it!

How about this, added a resivoir to my transformer mod. Still need to throw a 510 on there and plumb it but feels real nice. Can use it as a PT or PV.
Dan

 

[CloudBurst]

Hey Dan, ya that looks nice! Did you permanently attach them?

 

[Scubabatdan]

Hey Dan, ya that looks nice! Did you permanently attach them?

Yes a dremel drill and a 1/16 drill bit and some tiny screws, can be unscrewed and removed if the feature is not needed or wanted. Just used a third pill fob and milled out the finger press area, drilled a 1/4" hole for the bottle nipple, and drilled 2 holes for attachment. Kinda matches this way.
Dan

 

[WillyB]

How about this, added a resivoir to my transformer mod. Still need to throw a 510 on there and plumb it but feels real nice. Can use it as a PT or PV.
Dan

Always the show-off.

Great work as usual.

 

[Scubabatdan]

Always the show-off.

Great work as usual.

LOL, yeah yeah... hehehe Got the plumbing on the 510 done today, have a look. Works fantastic!
Dan

 

[Charged]

Hey Dan that looks great. Now get back to your "Other" project hehe

 

[Scubabatdan]

Hey Dan that looks great. Now get back to your "Other" project hehe

Uh-Oh *BUSTED* LOL 8-o
Dan

 

[WillyB]

LOL, yeah yeah... hehehe Got the plumbing on the 510 done today, have a look. Works fantastic!
Dan

Looks almost as good as my Trailer Park version.

 

[Scubabatdan]

Looks almost as good as my Trailer Park version.

Sweet!
Ok Top view:
Dan

 

[Lightgeoduck]

Sweet!
Ok Top view:
Dan

ScubaMan that is sweet...You do not know how much that helped... I was shopping around for my next mod idea... and saw these little japanese ashtray tubes(I am in japan by the way ) they like portable ashtrays because they don't like ashing on the ground...

anyway I didn't think of getting two and connecting them the way you did.... I think I will have to get them now and give it a try


THANKS

 

[Sci]

Hey Stormi, have you mounted a JB to your fairing yet so you can hit it on a road trip?
Just run a wire off the battery & regulate it down to 5v(have to leave the regulator in the open air to cool). Then you could block of a section of the tank & run a tiny siphon hose from it to the JB. Need to use a carto though, a cart would probably blow off.

Yeah, I know... Way out there. But, if there weren't a few people around that were "way out there", we'd still think the moon was made of cheese. Lol...

 

[CloudBurst]

I have a set up with an auto batty with a bent cart so I can squeeze it up in my full faced helmet. No JB yet, I just top it off when we stop and use my JB at stops!! LOL

 

[Sci]

I have a set up with an auto batty with a bent cart so I can squeeze it up in my full faced helmet. No JB yet, I just top it off when we stop and use my JB at stops!! LOL

LOL... How did I know you had something set up to use!
Here's a pic of something I'm working on that would work for you with a kensington/apc/etc(usb power supply):

The lights on the one I have are closer together making the top smaller. The atomizer comes out the end of the lights. On the other hand, you could just pull the lights off & have the connector at the end of the flexible tube.

 

[BuzzKill]

Universal Flashlight / Laser Barrel Scope Clamp Mount - eBay (item 250631289003 end time Jun-10-10 09:44:50 PDT)

try this !

 

[chev327fox]

Universal Flashlight / Laser Barrel Scope Clamp Mount - eBay (item 250631289003 end time Jun-10-10 09:44:50 PDT)

try this !

Machined aluminum one... good find Buzz, all you need to do with that bad boy is glue a piece of flat rubber on the inside of both sides of the clap and it would work great!! You could also paint it or sand and polish it too.

 

[CloudBurst]

Just in case anyone is interested, Dan made a pretty cool answer to my problem here.

http://www.e-cigarette-forum.com/forum/atomizer-mods/48436-new-atomizer-coil-shape-12.html starts with post #119

Attaches to any mod! A work in process but my first one works! Check it out.
Someone else did this too but I can't find the thread! Great ideas going on everywhere, thanks Dan!

 

[CloudBurst]

I tried to make one of those atty connectors you made that wired directly into the usb connector...didn't turn out well! LOL

LOL... How did I know you had something set up to use!
Here's a pic of something I'm working on that would work for you with a kensington/apc/etc(usb power supply):

The lights on the one I have are closer together making the top smaller. The atomizer comes out the end of the lights. On the other hand, you could just pull the lights off & have the connector at the end of the flexible tube.

 

[Sci]

I tried to make one of those atty connectors you made that wired directly into the usb connector...didn't turn out well! LOL

That light is easier. I drilled a hole in the piece where the LEDs go & put a small switch in it. I ran the atty out the end. I kind of got sidetracked & this one has been on the back burner. I was trying to leave the LEDs in it so it would look original. I've got some new surface mount switches that I can use that should work. Just too much stuff in that little space with a regular switch. It worked with the other switch, but I didn't like the look of it.