Omega rba rebuild help

[BenLopez33]

Hi, recently I invested in an Omega rba, i know how to build RBAs with posts with holes drilled into them. My Omega doesn't have holes inside the posts. Can I get help with a great subohm wrap around build? I mean less than a .3 ohm.
If not, can you explain to me how to make holes inside the posts. Thanks for all the help.


Sent from my iPhone using Tapatalk

 

[boborone]

How long have you been vaping and please post a couple pics of other builds you have done and the battery you're using before I answer.

To everyone else, please don't answer this question. I'm conducting a test. Its a simple answer, and with all the threads from new people on this subject, I'm curious about the knowledge.

 

[novamatt]

How long have you been vaping and please post a couple pics of other builds you have done and the battery you're using before I answer.

To everyone else, please don't answer this question. I'm conducting a test. Its a simple answer, and with all the threads from new people on this subject, I'm curious about the knowledge.

Hahahaha. I like it.

 

[CloudsinCrowds]

yes i fully agree with this test you are putting on im glad i didnt answer seeing as it did it today with my omega and my _________ battery and i enjoy it very much
figured i keep the integrity of the test with my ______ input lolz



carry on. dont mind me

 

[CloudsinCrowds]

i dont want to be rude but im pretty sure hes lacking full experience...i dont want to be that guy but i will be, SUB OHMING IS FOR ADVANCED USERS. I will repeat myself SUB OHMING IS FOR ADVANCED USERS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! one last time........SUB OHMING IS FOR ADVANCED USERS. and no one else. truly as a vaping community we need to pride ourselves on safety.
Seeing as safety is one of the major concerns here i would love to know about your setup.


sorry for my rant ive just seen far too many of these threads...

 

[boborone]

i dont want to be rude but im pretty sure hes lacking full experience...i dont want to be that guy but i will be, SUB OHMING IS FOR ADVANCED USERS. I will repeat myself SUB OHMING IS FOR ADVANCED USERS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! one last time........SUB OHMING IS FOR ADVANCED USERS. and no one else. truly as a vaping community we need to pride ourselves on safety.
Seeing as safety is one of the major concerns here i would love to know about your setup.


sorry for my rant ive just seen far too many of these threads...

Sure thing dude.

At work right now I'm vaping a .43ohm single coil Helios using a Sony VTC4 and a .18ohm dual coil igo m with a Sony VTC3.

 

[CloudsinCrowds]

Well then it seems you are up to date, you got the right batteries. So anyways i can get down to the point. the omega builds just the same as all other rdas besides the fact that you need to trap your wires under the screws kayfun style. Pretty easy, seeing as you are building between .4 and .18 now then achieving .3 is easy just use the same number of wraps you normally would i find gets nearly my targets ohm load. I have noticed that you need to make sure the coil leads going to the post arent too long or your ohm load will differ from what you are used to with the two drippers above.
I also have noticed my coils are more durable in the omega seeing as the wire isnt being pinched by the bottom of a screw but rather trapped under the screw head.
Best of luck, again sorry for the rant and being rude man.

 

[dice57]

hmm, scratching head, on rba's of mine that don't have a mounting hole, I utilize the screws and attach the wire under neat the screw head. Yep, that's how I do it.

If still having problems, with the omega, just send it to dice house of builds and juices. I will set it up with a 0.3 ohm build, and run it through the paces for you. Be sure to include a prepaid return label and will get it straight back to you. I promiss, cross my heart and everything!!!!


Vape long and Prosper!!!

 

[boborone]

And you guys f'ed up the test. You know this kid knows nothing and is farthest away from safety

 

[CloudsinCrowds]

He at leasted has the batteries he should b using come on now..
We shouldnt jump to conclusions about his knowledge. What really makes you think he doesnt know anything?
He has the right batteries those mod seems heavily used
Just because he goes down to .18 ohms doesnt mean he is uneducated and knows nothing.....

 

[boborone]

He at leasted has the batteries he should b using come on now..
We shouldnt jump to conclusions about his knowledge. What really makes you think he doesnt know anything?
He has the right batteries those mod seems heavily used
Just because he goes down to .18 ohms doesnt mean he is uneducated and knows nothing.....

Where does he say that

 

[novamatt]

He at leasted has the batteries he should b using come on now..
We shouldnt jump to conclusions about his knowledge. What really makes you think he doesnt know anything?
He has the right batteries those mod seems heavily used
Just because he goes down to .18 ohms doesnt mean he is uneducated and knows nothing.....

No, he didn't. Boborone (the guy telling you that the OP doesn't have the knowledge) said what battery and build HE's using because he thought you were asking him. The OP hasn't responded to this thread at all.

 

[CloudsinCrowds]

Ooooooooo im stupid as all hell guys again why i say dont mind me lolz.

But never the less thats embarassing my apologizes to everyone here. I must pay attention. I think my blood boils too easy.
Sorry guys
Over and out