OMG 6v SB

Status
Not open for further replies.

mcl5000

Super Member
ECF Veteran
Jul 15, 2009
762
16
39
Allentown, PA
Alright, so let me expand on my first post in here. I got my batteries yesterday, charged them up, and was able to vape on them for a couple minutes before I went to bed last night.

The atty/cart combo that was already on the SB was 18 mg pineapple (I don't even like this, was just trying it out). I could tell from the first "drag" that it was going to be something amazing. I actually got more flavor out of the juice than with the 3.7v, infinitely more throat hit, and much more vapor. Even with a quick 2 second drag, I get a ton of vapor.

I typically take 5-7 second drags, but I don't even think that's possible with 6v.

Next, I put on my atty with HV Peach from NHaler. Drew isn't kidding when he says this stuff is made for HV PVs. Christ, this was unbelievable. I literally couldn't see the monitor for a good 5-10 seconds after each vape.

If you're thinking about getting some 6v action going, don't wait any longer. Just buy them. Buy two extra batteries also so you always have 6v at your disposal.



Anybody able to tell me how long the 6vs charge will last me compared to the standard SB battery?

edit - 510 atty
 

Xenogy

Senior Member
ECF Veteran
Jul 10, 2009
160
3
Washington
I have some Nhaler HighVolt RY4 I want to try when my SB arrives. Got it in a juice trade a couple weeks ago. Loads of vapor and throat hit is great but the flavor is kinda bland on my 510. So I'm hoping 6v will kick it up a notch.

Anyone know if the 18650 charger that I ordered with the SB can also charge the CR123a batteries? Is it just the same one as on the website just discounted like $2 because I ordered it with a SB?
 

jboze

Super Member
ECF Veteran
Verified Member
Jun 30, 2009
806
3
Orange County, CA
I have some Nhaler HighVolt RY4 I want to try when my SB arrives. Got it in a juice trade a couple weeks ago. Loads of vapor and throat hit is great but the flavor is kinda bland on my 510. So I'm hoping 6v will kick it up a notch.

Anyone know if the 18650 charger that I ordered with the SB can also charge the CR123a batteries? Is it just the same one as on the website just discounted like $2 because I ordered it with a SB?

Don't use a 3.7v charger for 3.0 batts!
 

youngunner

Super Member
ECF Veteran
Jun 29, 2009
451
1
Tampa FL
I have some Nhaler HighVolt RY4 I want to try when my SB arrives. Got it in a juice trade a couple weeks ago. Loads of vapor and throat hit is great but the flavor is kinda bland on my 510. So I'm hoping 6v will kick it up a notch.

Anyone know if the 18650 charger that I ordered with the SB can also charge the CR123a batteries? Is it just the same one as on the website just discounted like $2 because I ordered it with a SB?

I got the Tenergey deal- 6 LiFeO4 bats and charger, but I also bought some 18650 3.7v 3000mAh bats- for a charger I bought a DSD multi-charger that supposivly chargers 18650s and CR123a 3v or 3.7v. I am STILL waiting on my 18650 bats so and I have the Tenergy charger so I haven't tried the DSD charger yet but you can get the charger on e-bay for around $10 off ebay : DSD intelligent Charger for Lithium Battery 18650 CR123 - eBay (item 250502544621 end time Oct-21-09 21:30:26 PDT)

I bought it from this seller and it got here in about 7 business days from China- I was just reading his specs and it says something about 5.5v- I dunno- but its the same charger as the tl-100 and I think it chargers at either voltage. For me mainly it will only be charging my 18650 3v 3000mAh bats. But I got it so I can get some normal RCR123a Li 3v 2400mAh down the road (incase I didn't like the LiFeO4s)

EDIT: after looking at it again- Im not sure if 3v rcr123a will work in this DSD charger? will it?
 

jboze

Super Member
ECF Veteran
Verified Member
Jun 30, 2009
806
3
Orange County, CA
I got the Tenergey deal- 6 LiFeO4 bats and charger, but I also bought some 18650 3.7v 3000mAh bats- for a charger I bought a DSD multi-charger that supposivly chargers 18650s and CR123a 3v or 3.7v. I am STILL waiting on my 18650 bats so and I have the Tenergy charger so I haven't tried the DSD charger yet but you can get the charger on e-bay for around $10 off ebay : DSD intelligent Charger for Lithium Battery 18650 CR123 - eBay (item 250502544621 end time Oct-21-09 21:30:26 PDT)

I bought it from this seller and it got here in about 7 business days from China- I was just reading his specs and it says something about 5.5v- I dunno- but its the same charger as the tl-100 and I think it chargers at either voltage. For me mainly it will only be charging my 18650 3v 3000mAh bats. But I got it so I can get some normal RCR123a Li 3v 2400mAh down the road (incase I didn't like the LiFeO4s)

EDIT: after looking at it again- Im not sure if 3v rcr123a will work in this DSD charger? will it?

Don't use a 3.7v charger for 3.0 batts!

Only if it's a multi-volt charger. If it's multi-volt then it should have a switch to change back and forth between 3.7 and 3.0v batteries. If you don't see a switch then you have a 3.7v only charger and are going to screw up your 3.0v batteries at best, cause a fire and kill someone at worst.
 

MarthaT

Moved On
Jul 23, 2009
1
0
56
  • Deleted by AngusATAT
  • Reason: spam
Status
Not open for further replies.

Users who are viewing this thread