Oops, one more question!

Status
Not open for further replies.

Dawn L.

Senior Member
ECF Veteran
Oct 19, 2010
180
11
Oklahoma
Got my Riva 510 in today and I also ordered some cartomizers, along with the carts, just to see what I prefer, but I can't figure out how to put juice in the carto? I'm used to a KR808 D-1 carto and that was easy to refill but this new carto has a plastic piece on the draw end, which I took off, then there's another plastic piece down in there that seems to be attached to the wall of the carto?? I have no idea how to put juice in this thing!!:confused:
 

DocWyatt

Ultra Member
ECF Veteran
Oct 6, 2010
1,888
4
OK
This will somewhat depend on the type of carto you bought... but the condom method should work with almost any...

Step 1: Use one of the end caps you pull off, use the longest one.

Step 2: Fill 1/2 will juice.

Step 3: Slowly slide the carto in, threads first. This will force the liquid in.

Step 4: Pull out and wipe off dry.

Step 5: Done.
 
Last edited:

DocWyatt

Ultra Member
ECF Veteran
Oct 6, 2010
1,888
4
OK
If you bought soft cap standard 510's, then you can pull off the cap and drip it in. But for now, that method is easiest. If you bought EGO MEGA, then it gets more complicated...

You can do a Youtube search on either the Condom Method or Drip and you can watch if you like. But filling the cap and sliding it in as rather simple.
 
Last edited:

Dawn L.

Senior Member
ECF Veteran
Oct 19, 2010
180
11
Oklahoma
The outer plug looks similar to my KR808 carto's, except its hard plastic, but the thing on the inside is actually a plastic piece that is attached to the walls of the carto and has 2 small holes in it that a paperclip won't fit into. I'll try the condom method since I can't get the inner plastic piece out? I don't know how I'm ever going to wash them, though?? Its not the O-ring that's in many cartos I've seen, its actually a built in divider wall between the bottom and top of the carto, it doesn't come out at all.
 

foggy1

Super Member
ECF Veteran
Verified Member
Aug 12, 2010
410
6
S F Bay Area
If you got the ego type mega carto's like I did (type B, full size, chisel tip)
pull off top cap, w/one hole
pull out inner cap, w/two holes
pierce tube in center with pin or needle
fill thru tiny hole you made till one drop appears at threaded end
mabe someone can tell us more as this is my first experience w/these
hope this helps, happy vaping !
 

Dawn L.

Senior Member
ECF Veteran
Oct 19, 2010
180
11
Oklahoma
I don't know! The box just says cartomizers and I ordered them from LF along with my Riva, I'm pretty sure it just said 510 cartomizers when I ordered them. I don't really care if I lose juice, but I would like to be able to run water thru the carto to clean it a couple times before I toss it. They're pretty long, though, compared to the carts, I'd say they're 1/3 longer than the 510 cartridges, but my order form doesn't say mega or anything. Does that help?
 

Dawn L.

Senior Member
ECF Veteran
Oct 19, 2010
180
11
Oklahoma
Its a Joye standard 510 carto, used the syringe to fill one and the condom method for another. They're both working great. But I also filled a cartridge and it seems to be getting dry at the atty end while there's still plenty of juice further up inside the polyfil or whatever the stuff is that comes in them already...there is definitely a learning curve to all this!
 
Status
Not open for further replies.

Users who are viewing this thread