Opinions on box mods! :)

[JoppaRoadCruiser]

Lung hits are pretty much necessary above a certain wattage. Depending on the device, IMO that starts at somewhere between 15 and 20 watts.

Why exactly is this? Is it that the coils are not getting adequate air flow with mouth to lung hits?

 

[brickfollett]

I drilled out my Reomizer air hole to 2.2 mm if I remember correctly. I also drilled the air holes bigger in my IGO-L and the dual holes in my Trident. I never tried dual coils in the Reomizer but I vaped down to 0.5 ohms with a single and it was great. People have gone down below 0.3 with no issues. People also stuff dual coils into Reomizers, but it's tight

Currently using a Chalice clone with dual coils at 0.5 ohms. I had to drill the air hole bigger and add another one to it.

Once the air holes are right I believe you can lung hit any atty.

There's a chalice clone? Where did you find that?

Sent from my XT1080 using Tapatalk

 

[Completely Average]

Sorry Craigo, I missed this last time I read your post. Lung hits are pretty much necessary above a certain wattage. Depending on the device, IMO that starts at somewhere between 15 and 20 watts.

That depends entirely on your coil build. I've got high ohm twisted wire builds that don't even start producing vapor until 14-15 watts.

 

[Ryedan]

Why exactly is this? Is it that the coils are not getting adequate air flow with mouth to lung hits?

That's exactly how I look at it JoppaRoadCruiser. Here's M.C. Vapes on the topic. He gets into it at about the 2 minutes mark.

 

[Ryedan]

That depends entirely on your coil build. I've got high ohm twisted wire builds that don't even start producing vapor until 14-15 watts.

I don't know the wire gauge you're using or any other details CA, but from what you said I suspect you've got a lot of wire to heat up in those builds and heat up time is the issue.

If that's not the case, I'm interested to know what the advantage is in a build that needs 15 watts to just start making vapor

 

[jstjoehere]

Sorry I'm really tired and wrote that out wrong haha I meant I opened up my nimbus clone to 2mm airhole and ran it out 0.6 ohm dual coil. What I meant was I want to get the awesome dense tasty cloud people talk about with sub ohm but tbh I prefer to mouth inhale and don't find the flavour that tasty with a direct lung inhale which of course I use a Sony 30amp with the 0.6 (even tho a normal AMR 10amp battery will suffice with that)


Sent from my iPhone using Tapatalk

.
Nothing in the rules says you have to do lung hits. I mouth to lung hit and am fine with it. On the ocassion I will do lung hits to get the nic going like first thing in the morning or when Im under alot of stress. Better to enjoy the vape than try to make it something you dont enjoy

 

[Ryedan]

There's a chalice clone? Where did you find that?

Nope, I had a brain fart ... It's a Cyclone clone from FT . I had to drill it out for bottom feeding, drill air holes and fix a loose negative post, but it hasn't been off my Reo since. It's time to get a couple of the real ones

 

[Craigo121]

.
Nothing in the rules says you have to do lung hits. I mouth to lung hit and am fine with it. On the ocassion I will do lung hits to get the nic going like first thing in the morning or when Im under alot of stress. Better to enjoy the vape than try to make it something you dont enjoy

Defiantly true! It's got to be enjoyable or you would just go back to the analogs!

But mouth to lung on low ohms apparently it's just way too strong and hot, I know you lower the nic on low ohms but still?


Sent from my iPhone using Tapatalk

 

[JoppaRoadCruiser]

Thanks Ryedan. I'll watch that video tonight. I'm just now getting into mechs and rebuildables myself. Got a stingray and patriot clone and looking forward to some serious coil building. Should have my batteries, charger, and multi meter ordered next week.