im very excited! i do have one question though, i thinking about getting the 510 adapter and wanted to pick up a pack of cartomizers to refill, does anyone know a reputable site that sells these in packs of 5?
Ordering my v3 today
- Thread starter captiancd89
- Start date
- th_trl_thread_readers 0
- Status
madvapes Refillable 510 Cartomizers
LiteCigUSA 510 SLB SOFT CAP Blank Cartomizers
AwesomeVapor Blank Cartomizers for the 510!
to name but three...
LiteCigUSA 510 SLB SOFT CAP Blank Cartomizers
AwesomeVapor Blank Cartomizers for the 510!
to name but three...
Hey there Captain...good choice on the V3! You can go 6v or 3.7v with either two RCR123's or PS's AW 17670 3.7v battery...so the versatility is there.
I wanted to let you know though...PS is closed and will not be back until Monday due to Vapefest. They had it listed on their forum and on Twitter I believe...but don't let that stop you from ordering cause it's worth it!
<-----My V3!
I wanted to let you know though...PS is closed and will not be back until Monday due to Vapefest. They had it listed on their forum and on Twitter I believe...but don't let that stop you from ordering cause it's worth it!
<-----My V3!
thanks a ton for responding so quickly, ill def use one of those sites to buy the carts. The standard bats that come with the v3, are they for 3v or 6? there:
RCR123a Lith-Ion LifePo4 batteries (Rated at 3.0v - 750mAh)
im assuming because you use 2 at 3v that makes it 6.
RCR123a Lith-Ion LifePo4 batteries (Rated at 3.0v - 750mAh)
im assuming because you use 2 at 3v that makes it 6.
That's correct. Slide two batteries in and you will be vaping at 6v.
The nice thing about 6v and using carto's is that they are much more forgiving than a normal 510 atty. Since they stay wet by nature much longer, they are less likely to pop on your first couple of pulls. I killed 3 atty's in 20 minutes when I first got a BSB back in March...I then ordered carto's because I wanted to save the frustration...figured if I blew one then I was only out 2 bucks instead of 10....and I never went back to standard attys since!!
Thanks man good to know!
Oh awesome and how long do the carts usually last? and whats a good method to fill them? Ive only owned ecigs with regular attys
OK i just ordered the full v3 kit, 30 caromizers, 3ounces of juice, and some zip tips Wooh.
It's a big no-no if you want it to function. It would probably burn out VERY fast.
Does any one know the resistance of the stainless atty supplied with the kit?
It seems to do just fine at 6-v so far!
Mike
It seems to do just fine at 6-v so far!
Mike
Does any one know the resistance of the stainless atty supplied with the kit?
It seems to do just fine at 6-v so far!
Mike
i just bought a crap ton of 510 carts now im nervous they wont work well on 6v >.< what yall think
You need to be somewhat careful with anything you use at 6 V, but the 510 cartos will be just fine (as long as the screw threads fit) - just make sure not to ever vape them to the point of being dry. Knife, if your atty is still doing fine at 6 V, chances are very good that it's a standard. Make sure you don't try to use the low-resistance atties at 6 V unless you have a bottomless supply of money for replacements.
I was told that i should get Hires 4.5ohm attys, kinda interested to try it out
How is the size on the V3? I want one but worried about it being to big, I calculated it out to be about the size of a pen "length wise" with a push top. Which in my opinion would seem too big to carry around in your pocket if out and about.
Not a mod I would carry in a shirt pocket.
Dimensions (Without Atomizer):
Length: 105.75mm (4.16")
OD (Width): 18.95mm (.745")
Inside Diameter: 16.93mm (.665")
Weight With Batteries: 3.96 ounces
- Status
Similar threads
