Ovale v6 vv system...?

Status
Not open for further replies.

Cat5ive

Full Member
Jun 25, 2011
15
1
35
Dan Vegas, VA
I just purchased an Ovale v6 vv system, that came with two clearomizers. The pv itself works fantastic, I filled the clearomizer up with juice and it vaped wonderfully. The problem I have is that once the clearomizer ran dry and I refilled it, for whatever it reason, it will not hit like it did when it was first filled. The hit becomes dry with very low vapor production and taste. I can't seem to get a pic of the clearomizer to upload but it's about an inch and a half tall and is filled with a cotton filler. I know the device is okay because when the first clearomizer acted up and I filled the second one, it hit great until I refilled it and had the same problem... Essentially my question is, what other clearomizers or tanks will fit on the ovale v6? I just bought this a day ago and I don't even want t buy any more of these clearomizer if they're going to behave this way.. I've seen a few people on YouTube using something called a "boge" tank on it (sp?).. Which he seemed to have no problem with.. I guess I just need something that will handle that recessed connection and not leak, work after refilling, etc. lol I've smoked a kr808-d for over a year now and it works great for me.. This is the first time I ventured outside of that and this clearomizer that came with it, just stinks, what good if you can't refill right? Thank you ECF!!!
 

sailorman

Vaping Master
ECF Veteran
Jun 5, 2010
4,305
2,840
Podunk, FLA
The first problem is that you don't have clearomizers. You have cartomizers. They may be transparent, but they're still cartomizers because they contain filler. If you let it run dry, you destroyed it. You cannot let cartomizers run dry. They are filled with polyester batting, like a pillow. That stuff will burn. You need to fill it thoroughly and top it off any time the vapor begins to get thin or weak. It takes a little practice to know when to top off and most of us trash a couple of them while we learn how to spot the right time to top off the juice.

I'm not familiar with the Ovale V6. You may need a 510/510 extension to use some common cartomizers, clearomizers, etc. The tank you are referring to is a cartomizer tank. It holds a cartomizer with a hole in it. The juice is fed into the cartomizer from the tank, through the hole. This eliminates the need to top off the cartomizer.

If your Ovale can use a regular cartomizer, a clearomizer will fit as well. I suggest looking into that option, or get some new cartomizers and check Youtube for instructions how to properly fill them and keep them topped off.

Since you are using a VV, you probably should stick to devices with a resistance of about 3 ohms.
You can go to Gotvapes.com and check out the Phoenix clearomizers. These are real clearomizers that don't need to be topped off because they contain no filler material. Also, look at the Vivi Nova tank system. It also doesn't need to be topped off and it holds about 3ml. of juice. Both are highly recommended and easy to use. You might possibly need a 510/510 extension for the Vivi Nova. If so, you can get it there for about $3. They also have conventional cartomizers. Boge or Smoketech in 3ohms should work fine.

All 510 connections are recessed, female connectors on the battery end. When you say it has a recessed connection, is that what you mean, or is there some kind of a well around it that would interfere with a larger device sitting flush?
 
Last edited:

PittBoss

Vaping like a boss
ECF Veteran
Verified Member
Mar 27, 2012
11,961
1,591
Lincoln, NE
I believe the Oval V6 has a well surrounding the connection that itself is recessed into the device. I don't think a tank would fit in there, unless a 510 extender would jut it out enough. Perhaps a 3.5ml tank could squeeze in there though..But I would agree with the Phoenix clearomizers or even the fluxomizers from GotVapes. Good stuff there!
 

Cat5ive

Full Member
Jun 25, 2011
15
1
35
Dan Vegas, VA
The first problem is that you don't have clearomizers. You have cartomizers. They may be transparent, but they're still cartomizers because they contain filler. If you let it run dry, you destroyed it. You cannot let cartomizers run dry. They are filled with polyester batting, like a pillow. That stuff will burn. You need to fill it thoroughly and top it off any time the vapor begins to get thin or weak. It takes a little practice to know when to top off and most of us trash a couple of them while we learn how to spot the right time to top off the juice.

I'm not familiar with the Ovale V6. You may need a 510/510 extension to use some common cartomizers, clearomizers, etc. The tank you are referring to is a cartomizer tank. It holds a cartomizer with a hole in it. The juice is fed into the cartomizer from the tank, through the hole. This eliminates the need to top off the cartomizer.

If your Ovale can use a regular cartomizer, a clearomizer will fit as well. I suggest looking into that option, or get some new cartomizers and check Youtube for instructions how to properly fill them and keep them topped off.

Since you are using a VV, you probably should stick to devices with a resistance of about 3 ohms.
You can go to Gotvapes.com and check out the Phoenix clearomizers. These are real clearomizers that don't need to be topped off because they contain no filler material. Also, look at the Vivi Nova tank system. It also doesn't need to be topped off and it holds about 3ml. of juice. Both are highly recommended and easy to use. You might possibly need a 510/510 extension for the Vivi Nova. If so, you can get it there for about $3. They also have conventional cartomizers. Boge or Smoketech in 3ohms should work fine.

All 510 connections are recessed, female connectors on the battery end. When you say it has a recessed connection, is that what you mean, or is there some kind of a well around it that would interfere with a larger device sitting flush?

The ovale does have a 510 connection but it is recessed into the device, it's essentially a box. I think it has also been called the the Vision Gripper or something like that.. The guy I saw on YouTube was using some type of extender on his "Boge" tank. So whatever my alternative is has to be able to fit down into that "well". I think I would rather steer away from anything with filler in it. Let me post a link to that review so you guys can see the device if you haven't seen it already.

A PBusardo Review - F-50 Ovale V6 VV System - LJ's E-Smokes - YouTube
 

Cat5ive

Full Member
Jun 25, 2011
15
1
35
Dan Vegas, VA
Upon looking at ]the GotVapes website, I believe that what this device Can't handle is a "sleeved" connection, my girlfriend has an eGo-t and is using the stardust clearomizer on it, and while it does fit Into the hole, the connection can't reach the device.. If that makes any sense, if you guys watch that video you might have a better idea of what I could use to fit into the device. Thanks! :3
 

Cat5ive

Full Member
Jun 25, 2011
15
1
35
Dan Vegas, VA
I really like the look of that Vivi Nova Tank a lot a lot a lot, I'm really hoping/thinking that an extender would make that work similar to the boge tank that Psuardo had on his with the extender, possibly? :D

I'm actually asking if anyone knows if adding an extender to that Vivi Nova Tank would allow it to fit into the v6?
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread