Pillbox38's: Totally Wicked E.Smoking Liquid..About to hit the UK

Status
Not open for further replies.

pillbox38

Unregistered Supplier
ECF Veteran
Hi Edisme>>>It would be not that easy to custom mix for two reasons.. first one the time involved would make this slightly difficult, secondly i dont package the fluids myself they come pre packed and labelled from my supplier..

with regards a 24ml fluid i have read the last few posts and decided tomorrow i will organise for the fluids to be made as a 24mg mix.

The reason i have not had all bottles done in 30ml so far is because the totally wicked is in effect a new business.. So the costs so far have been high compared to its turnover..if you think about 19 flavours x 3 strengths at 20ml = 57 x whatever my initial stock of each is if we say 25 thats 1425 bottles.

then the same for the 30ml but i have decided tomorrow to order 16 flavours in 4 strengths at 30ml thats 64 x whatever quantity say 25 to start = 1600

Plus i need to add the 24 mg to my 20ml range so another 16 x 25 =400..


Moving into the 3000plus bottle territory...a lot of cash upfront:)


But i will add the 24ml in 16 flavours both sizes and the 30ml bottles in 16 flavours and 4 strengths..


By the way if anyone wants to add their view and description of the Wicked flavours on the guestbook feel free as i will at some point be adding these to my descriptions.

regarding USA site ..its on the agenda...
 

dazzer1975

Senior Member
ECF Veteran
Oct 11, 2008
109
4
50
Rochdale...sadly.
Awesome stuff pillbox, many many thanks for this.

I am not one for sycophantic ravings usually but the fact that you listen to your customers and more importantly are being transparent and conscientious with regards toxicology reports of your liquids means that without question you're one of the better retailers out there and will, I am sure go from strength to strength in this burgoening market.


Really is superb news though, I know it isn't probably the biggest issue in the world, but for simple ease and convenience and ultimately, continuity of taste and quality standards, I deem it an exciting prospect for me to be able to get the 30 ml bottles in the flavours I know I like at the differing strengths to allow me to implement a model of nicotine cessation.

Cheers.
 

pillbox38

Unregistered Supplier
ECF Veteran
Dazzer>>>Does,nt seem sychophantic to me , just a reasonable comment that i appreciate..thank you.

Its my customers that buy that allow me to extend my product range and in turn provide a better range for you to choose from..So its a two way thing, without customers i have no business.

It will take probably two weeks to get all the 30ml bottles in, and im just debating on a name for the 24mg.

I thought seen as we have 36mg=super high, maybe 24mg=extra high, 18mg= high, and 11mg =medium.. Any better ideas re the 24mg.. Let me asap as i will need a bottle with it on producing..

notsmellyanymore...Half a litre=16.5 bottles....Thats a lot of smoking..

Totally Wicked E Liquid
 

edisme518123

Senior Member
ECF Veteran
Oct 4, 2008
180
0
36
Daytona Beach, Florida (USA)
Hi Edisme>>>It would be not that easy to custom mix for two reasons.. first one the time involved would make this slightly difficult, secondly i dont package the fluids myself they come pre packed and labelled from my supplier...

That makes sense. I wasn't sure if it came prepackaged or if it came in master quantities that you divvy into smaller bottles. I really appreciate you being so prompt answering my question. If you get your US site up and running before I run out of my cigar liquid, you'll definitely be my next supplier. I look forward to trying a few of your flavors, probably one at a time though since my liquid consumption isn't too rapid. For starters I'm looking for a strong tobacco flavor that isn't sweet, but isn't harsh either. Something similar to a good pipe tobacco, or maybe an expensive cigar.
 

dazzer1975

Senior Member
ECF Veteran
Oct 11, 2008
109
4
50
Rochdale...sadly.
Dazzer>>>Does,nt seem sychophantic to me , just a reasonable comment that i appreciate..thank you.

Its my customers that buy that allow me to extend my product range and in turn provide a better range for you to choose from..So its a two way thing, without customers i have no business.

It will take probably two weeks to get all the 30ml bottles in, and im just debating on a name for the 24mg.

I thought seen as we have 36mg=super high, maybe 24mg=extra high, 18mg= high, and 11mg =medium.. Any better ideas re the 24mg.. Let me asap as i will need a bottle with it on producing..

notsmellyanymore...Half a litre=16.5 bottles....Thats a lot of smoking..

Totally Wicked E Liquid

Extra high seems a good choice, super, to me at least, denotes the apex so a simple "extra" high will clearly differentiate it from the 18mg strength while leaving no doubt the super high is a stronger mix.

Alternatively label 36mg as dynamite lol j/k
 

pillbox38

Unregistered Supplier
ECF Veteran
Dazzer>> i agree its extra high..

re the sample packs i had an idea earlier, i could produce a wicked presentation pack.. In a well designed wooden or a similar top quality box, fully logoed with all 19 flavours in in 10ml bottles.. like a box of chocs, it wouldnt be cheap but it would be a great product....


Totally Wicked E Liquid
 

deewal

Super Member
ECF Veteran
Aug 30, 2008
692
3
79
In a house.
I know this sounds really stupid but can someone tell me how to use the Dropper that comes with the bottle?
I took the lid off the bottle (with some difficulty) and found a flat plastic cap with a hole in the centre with a tube which goes down into the bottle off centre. The hole in the centre of the is flush with the top and trying to drip onto a cart was very very slow and i lost quite a few drops in the process. The supplied Lid with a plastic teet (like a dummy or pacifier without a hole in it) i don't know what to do with. Do i make a hole in the teet and then put the lid on or what ? Do i put the lid with the teet onto the bottle and then turn the bottle upside down until the teet is full then somehow turn the bottle upright and the liquid stays in the teet? Then how do i get it off without spilling the liquid.
Childproof? It's Me proof. :oops:
I did say it was a stupid question but there are no instructions on the bottle and i've spilled about a quarter of my 20ml bottle already. :cry:
 

rustylug

Unregistered Supplier
ECF Veteran
Aug 24, 2008
632
5
55
Aberdeen, Scotland
www.bebo.com
I had the very same proplem ..... The extra tops you get with the white dropper ruber bits are also meant to come with a GLASS dropper rod that fits in to the underside of the lid .... It sounds to me you never got your glass rod ... same happend to me .... the idea is you attach the glass rod to the dropper cap and use it when you want to refill your carts ... The plastic bit that comes in the bottle i had to pull off with a pair of long nose plyers....One souloution to this problem is to use a syringe for filling your printer ink carts.

Hope that helps, but i sounds like you never got the glass dropper rods with your juice.


I know this sounds really stupid but can someone tell me how to use the Dropper that comes with the bottle?
I took the lid off the bottle (with some difficulty) and found a flat plastic cap with a hole in the centre with a tube which goes down into the bottle off centre. The hole in the centre of the is flush with the top and trying to drip onto a cart was very very slow and i lost quite a few drops in the process. The supplied Lid with a plastic teet (like a dummy or pacifier without a hole in it) i don't know what to do with. Do i make a hole in the teet and then put the lid on or what ? Do i put the lid with the teet onto the bottle and then turn the bottle upside down until the teet is full then somehow turn the bottle upright and the liquid stays in the teet? Then how do i get it off without spilling the liquid.
Childproof? It's Me proof. :oops:
I did say it was a stupid question but there are no instructions on the bottle and i've spilled about a quarter of my 20ml bottle already. :cry:
 
Last edited:

deewal

Super Member
ECF Veteran
Aug 30, 2008
692
3
79
In a house.
Does the dropper come seperately now? With a child safe cap fitted as standard?

In which case what I think you'd have to do is use a suitable item (thin bit of metal or something) to pry out the plastic cap fitted in the bottle presently. Once thats out you can fit the dropper.

Yes the dropper comes separately and the plastic cap can be pried out easy enough. But if you look on the Wicked site you will see a moving picture with the blurb etc but also a very quick animation of the lid with the dropper being dipped into the bottle to be filled. There is a tube coming from the dropper which goes into the bottle but mine has no such tube. Mine just has a Lid with a dropper teet on it. No Tube. No way to get the liquid from the bottle into the teet.:confused:
 
Status
Not open for further replies.

Users who are viewing this thread