Pioneer4U IPV4 100W and IPV Mini V2 70W coming soon

[CaCHooKa Man]

Just when I thought I was cool with my sigelei 150W...

https://originvape.com/product/ipv4-100w-mod/

This mod ships out to us from Green Leaf at the end of January or beginning of February. Not many details are known so early, but here are a few of the features:

• Built by Green Leaf
• Yihi chip
• Resistance reads down to 0.1 Ω
• Adjustable wattage: 5W-100W
• Takes 2 18650 batteries
• Pass through mode is supported
• Fully magnetic door, no screws necessary
• Auto ohm resistance meter finds ideal voltage for tank/dripper
• Voltage is calculated automatically as wattage is adjusted
• Wattage regulated via two buttons, -/+
• Mini USB interface charging port
• Limited warranty issued by ASMODUS – a USA service center

https://originvape.com/product/ipv-mini-v2-70w-mod/

This mod ships out to us from Green Leaf at the end of January or beginning of February. Not many details are known so early, but here are a few of the features:

• Built by Green Leaf
• Yihi chip
• Resistance reads down to 0.1 Ω
• Adjustable wattage: 5W-70W
• Pass through mode is supported
• Takes 1 18650 battery
• Auto ohm resistance meter finds ideal voltage for tank/dripper
• Voltage is calculated automatically as wattage is adjusted
• Wattage regulated via two buttons, -/+
• Mini USB interface charging port
• Limited warranty issued by ASMODUS – a USA service center

 

[Circa Survivor]

Jeez, the iPV4 looks more like a mini than the actual mini

 

[CaCHooKa Man]

Jeez, the iPV4 looks more like a mini than the actual mini

It's just the scale of the images. It's using dual 18650s.

 

[Jethro66]

IPV4 Looks like a very nice mod but Im a little disapointed in them on what they did with the midi...

 

[Circa Survivor]

IPV4 Looks like a very nice mod but Im a little disapointed in them on what they did with the midi...

Ya I don't see any difference in appearance from the current mini to the v2. I guess it's just the wattage upgrade :\

 

[Raguvian]

Ya I don't see any difference in appearance from the current mini to the v2. I guess it's just the wattage upgrade :\

To be honest, I love how my Mini feels in my hand. I may have to pick up a black version of this V2 in the future. I've got no complaints with my V1.

 

[InfinityzeN]

Hopefully this fixes the unstable power delivery of the Mini.

 

[Bman123]

It's just non stop box mods coming out lately. I'd love to get one but with the way they pump them out it seems like something better is always coming out soon. I just bought a copper penny clone to use til the reviews get out about all these new box mods.

Magnetic battery door is nice and about time, don't know why they make them fire down to .1 ohm, it's not necessary at all when you control the wattage on them

 

[CaCHooKa Man]

It's just non stop box mods coming out lately. I'd love to get one but with the way they pump them out it seems like something better is always coming out soon. I just bought a copper penny clone to use til the reviews get out about all these new box mods.

Magnetic battery door is nice and about time, don't know why they make them fire down to .1 ohm, it's not necessary at all when you control the wattage on them

It's necessary if you want to be able to use the full range of the device. For example, I have the Sigelei 150W and I have to build below 0.4 ohms in order to use the full wattage range.

Sent from my HTC One_M8 using Tapatalk

 

[Bman123]

150 watts is crazy

 

[crxess]

I read this post yesterday. Just left to mull it over. Still not sure whether to be happy or P.O.ed. I just bought (2) IPN mini 30 watt units and went ahead and ordered a Cloupor mini.
I really did(do) want one higher power unit that can handle at least .2ohm loads. I generally build above .5 but like to test now and then at around .3ohm and would like the head room.

 

[erieboyz]

This might get me to forget about getting the sx mini.

 

[Jethro66]

This might get me to forget about getting the sx mini.

Yup I'm in the same boat as you The features on the IPV 4 look really good but wondering what chip is in the midi

 

[erieboyz]

Yup I'm in the same boat as you The features on the IPV 4 look really good but wondering what chip is in the midi

Not to mention that it'll probably be cheaper than the sx mini. I think they will have a better chip in the ipv mini 2 after the problems they had with the first version.

 

[Stringplucker]

The vaping world is like the computer world was in the early 1990's...by the time you buy it brand new, it's two generations behind.

 

[crxess]

The vaping world is like the computer world was in the early 1990's...by the time you buy it brand new, it's two generations behind.

With one exception. At least with Recognized brands you knew your purchase would work right. Been building PC's for over 25yrs. Can't remember a time they were so shoddy in QC as Vaping equipment is. Makes you wonder where these companies got their education and experience.

 

[SavePaperVapor]

This might get me to forget about getting the sx mini.

I have the sx mini and it's by far the best piece I own. That said, I may get the ipv 100 depending on what yihi chip it uses. The sx350 in the mini is the best chip out right now imo and I know they aren't putting those in this ipv line, but if it can come close to it I'll bite.

 

[erieboyz]

So you think the mini is still the go to mod to buy?

 

[SavePaperVapor]

For sure. I'm pretty sure I could run over my mini with my truck and it would still work. The form factor is phenomenal as well. I know damn near 200 bones is a lot of dough to cough up though. Worth every penny imo.

 

[erieboyz]

That's for sure. Thing is I had sucks bad luck with two of the three devices in the past month I'm a little hesitant on this one or any other to be honest.