Pipes

[Trips1103]

Hi ..

I've been vaping for several years, and I'm looking to add a pipe to my collection. Unfortunately, most of the threads regarding pipes on this forum are several years old. So is much of the information.

I've tried looking online, but I'm been inundated by a mass of e-spam. Tons of sites wanting to sell, but no real information out there. At least, none that I have been able to sort through yet.

I figure my best bet at a starting point would be advice from other vapers who have tried such an item at one time or another.

I'm looking for a pipe, a lady pipe if possible. Something that works with cartomizers. I'd love it if the pipe were able to work with tanks, but I'm going for somewhat streamlined looks so I'm guessing cartos would be my best bet. I don't need to be vv. A 3.7 device is fine, as most of my favorite juices work well at 3.7 - 4.0.

Would anyone be able to suggest a reputable product and supplier?


I'd appreciate any help or advice other would like to give.

 

[elephantsailor]

I've been looking at pipes, too. I don't own one, yet, but the guys at the link below seem legit, and I've watched a few of their videos. Very handsome equipment, but limited availability. PBusardo did a review of their juices at one point too and was very favorable.

Hand-Crafted ePipes, custom made personal vaping devices from ePipeMods.com ...more than just an eCig

 

[SilentScreams]

https://www.pbdragon.com/lair/mods/400-diablo-e-pipe-red.html

PBDrgaon is one of my preferred vendors but you can also find this pipe at Madvapes. It's an auto devices uses an 18500 battery. Haven't used this one myself but been considering it. There is also a mini version. I think the mini is only available at madvapes.

 

[Ken_A]

I've got 2 601 C pipes. A 505. two epipe mods and two from PBDragon. I would say that the epipemods.com pipes have better variety and can be made very attractive. If you look at my profile here, you can see some of the configurations you can use. If you want VV, you can get an ego booster to work with them as well. See elephantsailor's post above for the link.

 

[Absintheur]

Jazz does a couple models and they work very well with cartomizers... Here is mine...

http://jazzepipe.com/

As stated E-Pipe Mods does some great pipes but you have to be quick when they are listed, they use a eGo connector and do great with an eGo tank or slim tank with a cone, or a eGo Mega carto... I have one and one on the way...

Steam Pipes

mine with eGo mega carto...

The one I have coming...

There is a maker in the uk on the Vape Pit forum that converts pipes, he has done two for me, 510 connectors His name is cockneyrebel

E-pipe mods do not come with a stem...you have to add one from their website, the others do come with stems. Cockney rebel is a great guy to work with and will do his best to set up a pipe the way you want it. The E-pipe mods you just have to watch the site close and when they post new ones order fast...they sell out quickly though there is a nice pink ivory wood on there now. Jazz pipes most closely resemble tobacco pipes.

 

[Johnnie Price]

If you want a cheap pipe, you could grab a Kuwako for your eGo. The Kuwako+Echo or Kuwako+auto eGo make great automatic pipes, but they're definitely not as pretty as the ones here. But for $30.00 plus shipping from 2 vendors, what do you expect?

 

[Absintheur]

It would be nice if there was a bent stem bowl Kuwako...

 

[Johnnie Price]

It would be nice if there was a bent stem bowl Kuwako...

I agree. I've heard good things about the new auto eGo at Mountain Vapor, and paired with a Jazz carto-tank it would come very close.

 

[shawnski]

here is a pic of my dragon from epipemods, if you have about. 150 $ to spend I recomend epipemods, u can pick one and a stem and have it fired up in a few days.
I am a vaper of wide range of devices fro ss mesh all the way back down to cartos but at the end of the day when I get home from work I like to grab my pipe, kick back on the couch and relax, I have to tell u there is something about that pipe in my hand at the end of a long hard work day that makes vaping that much more pleasurable and enjoyable, I just recently bought a small second epipe cause the dragon is fairly large and carries a 18500 batt and my little gandalf is a 18350.
On top of that there is a wide range of customizable tanks attys etc you can put on ur epipe, for me I use a penelope every now n then, my most go to is a kanger t2, these attys have a great all round performance and flavor that you can appreciate, although to attach ur stem u will need to trim a tad off the tip of the drip tip on the kanger but when u do the universal cherry vape tip that comes with the stems u get from epipes will fit nice and snug on it. If u need any further help feel free to pm me and we can talk some, definitely get a pipe it is a whole new way of vaping bud. SHAWNSKI

 

[Jerms]

Absintheur.. I will trade you my first born for those 5 epipes.

Sent from my LGL55C using Tapatalk 2

 

[Trips1103]

I've got 2 601 C pipes. A 505. two epipe mods and two from PBDragon. I would say that the epipemods.com pipes have better variety and can be made very attractive. If you look at my profile here, you can see some of the configurations you can use. If you want VV, you can get an ego booster to work with them as well. See elephantsailor's post above for the link.

I love your collection of photos. You have some nice set ups there!

 

[Renolizzie]

Love those pipes, Absintheur.

I've thought about a pipe. I am saving this thread to look over the links next month since I am done spending this month

 

[Trips1103]

The one I have coming...

Oh, this one is beautiful. I love it. Thanks for all the clips, and links. This is exactly what I needed from my peers. Thanks so much.

 

[Absintheur]

Absintheur.. I will trade you my first born for those 5 epipes.

Sent from my LGL55C using Tapatalk 2

Already have a first born of my own...one was enough, cured me you might say...lol.

Oh, this one is beautiful. I love it. Thanks for all the clips, and links. This is exactly what I needed from my peers. Thanks so much.

I am hoping one of the stems I have coming will look good with this pipe. I ordered regular stems from e-bay and will refit them for drip tips...should be easy enough. I really hope I can snag a Spheroid for this pipe and will do the stem to fit without gaps.

 

[Trips1103]

I am a vaper of wide range of devices fro ss mesh all the way back down to cartos but at the end of the day when I get home from work I like to grab my pipe, kick back on the couch and relax, I have to tell u there is something about that pipe in my hand at the end of a long hard work day that makes vaping that much more pleasurable and enjoyable

Exactly. That's precisely why I'm looking for one. I don't have much of a collection. Just some old Bloog mini ecigs, some eGo's - which are my staple, a box mod and my Spinner. My preference is for tanks over clearos and cartos, if at all possible. I'm pretty happy with the simple stuff, but I really like the idea of a pipe.

 

[Absintheur]

Of course relaxing with my big hose is nice too...

 

[Kropotkin]

There is a maker in the uk on the Vape Pit forum that converts pipes, he has done two for me, 510 connectors His name is cockneyrebel

Holy cats - those are beautiful.

Does he convert pipes you've found yourself, or does he sell them already converted?

 

[Absintheur]

He normally finds pipes he can convert tho if you have a pipe already he can tell you if he can convert it or not. A lot depends on the bowl size. He is working on a drop in type conversion tube that will come with leads so you can DYI a pipe yourself. You would have to drill out the bowl and wire the connector yourself.

 

[Kropotkin]

Thank you, Absintheur.

I always enjoy your photos. You have such unusual and interesting things.

 

[Ken_A]

I love your collection of photos. You have some nice set ups there!

Thanks. it works out well for me... change the pipes according to how I feel.

... I am hoping one of the stems I have coming will look good with this pipe. I ordered regular stems from e-bay and will refit them for drip tips...should be easy enough. I really hope I can snag a Spheroid for this pipe and will do the stem to fit without gaps.

you can re-size the stems with a drill and a tennon bit. I don't have mine right here with me, but I think it's a 5/8" bit. Then get the Cherry Vape Universal and the pipe stem fits right into it. if the stem is already sized correctly, the universal should be all you need.