Please help me out, I have a question about POWER!!!

[jwat82]

I have my first mech (magneto) and a kick (smok, but saving up for an evolv). This also my first dealing with VW. Sooo, my question is this: using the kick, will resistance affect battery life?

According to my questionable math skills, set at 10 watts with a 2.0 ohm carto/atty I would be pushing 4.47 volts and with a 3.0 ohm pushing 5.48 volts. So my thinking is that battery life would be better at 2.0 ohms.

Am I correct, or am I misunderstanding the situation?

Sent from my GT-P3113 using Tapatalk 4

 

[TheDarthJager]

The Kick

Power Chart

Hope that helps.

EDIT: sorry, attachment was too small.

 

[Stosh]

Don't worry about the volts or amps you're pulling regarding battery life (safety, yes know your amps). With a good quality 18650 battery, it should last most or all of a day. If not, put the gosh darned thing down once in a while... LOL

My experience, start with the lowest settings that produce vapor and inch it up slowly, stop when you get the best flavor, vapor WITHOUT any burning taste.

 

[dr g]

I have my first mech (magneto) and a kick (smok, but saving up for an evolv). This also my first dealing with VW. Sooo, my question is this: using the kick, will resistance affect battery life?

According to my questionable math skills, set at 10 watts with a 2.0 ohm carto/atty I would be pushing 4.47 volts and with a 3.0 ohm pushing 5.48 volts. So my thinking is that battery life would be better at 2.0 ohms.

Am I correct, or am I misunderstanding the situation?

Sent from my GT-P3113 using Tapatalk 4

Misunderstanding the situation. With a regulated mod, the wattage determines battery draw. So battery life should be similar, assuming both devices vape similarly.