Please help me with Joyetech Evic Supreme ! ! !

[radekpol]

I have a problem with my eVic Supreme. The thing is that the 4 screws, that hold down the top piece with the connector to the head, have stripped to the point where they no longer hold the connector and head together. Now the battery is unusable I was trying to find those screws in the stores, but no one has screws that small. The only place that carry those screws is some company located in Greece and the shipping is over $20. I was wondering if there is any other, and cheaper place where i could get them from. Ill post up a pic of the battery and the connector. Also i will include the pic of the screws with dimensions from a website in Greece.



NOTE: The pic of the 4 screws from the vic show one screw that is shorter, its due to the fact that it broke when i was trying to unscrew it.

Thank you for all your help, and i hope someone will be able to help me.

I will also include the picture that shows the dimensions of those screws
.

 

[Katmar]

Bump for an answer!!!!

 

[Sthur]

Hello, try and add some locktite to the threads and screw them back in. If it will bite and hold problem solved.

 

[radekpol]

Hello, try and add some locktite to the threads and screw them back in. If it will bite and hold problem solved.

Hello there, i will probably try that but the question is: Will i be able to remove those screws later on and replace them with a new good screws?? Will i have to somehow clean the hole where the screws go in?
To be honest with you, i don't like to do something permanently. If it will work as a glue and i won't be able to screw a new screws in then i'd rather pay those $20 and get a new screws.

Another problem i have is that i only have 3 screws, one of them is broken so i dont think i will able to re-use it :/

I really appreciate your help, thanks.

So please let me know, if i will be able to screw a new screws in when i get them?

 

[GBL1]

quit tearing it apart will help. lol try looking on a few hobby store and electronics store sites. They will have some amazingly small screws. Hope you find them. Just for giggles, your home hardware type stores usually have a decent selection of really small screws. You'd be surprised.

 

[Rickajho]

Gotta ask: Why were you disassembling the control head?

 

[radekpol]

I wasnt, i had no reason to disassembly. Thats the thing. When i noticed it was loose i was trying to see why, and then i noticed the screws didnt want to hold the top piece anymore.