hello everyone plese help me out ive got a zephyr buddha v2 and i want to vape at 200 watts i want the vape to be warm a nice taste and i dont want the puff to drag on for ages everytime i vape .. what wire should i use and how many wraps and what mm in between should i have it please and i want a dual coil thanks guys please help
please help wire and wattage problems
- Thread starter aaron2237
- Start date
- th_trl_thread_readers 0
- Status
would the mod matter if it goes above 200 ?? if so ill get a higher battery mod but i want to learn this before i go and buy higher watt mod
I have to ask why do you want 200 watts?
Many of us have never come close to that high, and can blow clouds with the best of them. I assume that's what you are after.
The biggest problem most have when running that high is your battery life will suck.
Can you give us some more info.
Many of us have never come close to that high, and can blow clouds with the best of them. I assume that's what you are after.
The biggest problem most have when running that high is your battery life will suck.
Can you give us some more info.
Even with true 30a batteries, on a dual battery mod you're going beyond their safe CDR (current discharge rate) past 180w. 200w+ at your own risk, it is not recommended.
i tried it out on someones mod once he was using 300 watts ... had about 2 second puffs the coils wasnt spitting they was heating up perfect timing and it was just a nice warm tasty vape loads or clouds (not really bothered about cloudsjust flavour ) and i dont use it that much so when i do i would like it like that i suppose and another problem i have is i started on a tfv8 and i was using about 140 watts but i dont like sub ohms anymore and the taste isnt as nice as drippers i think
If you want to vape at 200w safely, a triple battery mod with 25a minimum batteries (vtc5a) is what I'd recommend.
Wire is subjective. Coil ohm isn't as important on a regulated device such as the Alien, it's your batteries that are the most important. I use an OBS Engine on my Alien @ .22 ohm dual alien claptons @ 75w. The flavor is outstanding.
From the sound of things firstly I have to say, DO NOT USE A MECH MOD. There is some safety on a regulated device but batteries pushed to hard can vent.
You need to research battery safety and ohms law, I'm sure links will be posted soon.
Once you get a good handle on the safety side and decent at building you will be able to go to that friend and blow a similar cloud etc at like 75 watts. Or less.
I have gotten away from high watt cloud chasing and even with fused Clapton's I haven't topped 70 watts in months.
You need to research battery safety and ohms law, I'm sure links will be posted soon.
Once you get a good handle on the safety side and decent at building you will be able to go to that friend and blow a similar cloud etc at like 75 watts. Or less.
I have gotten away from high watt cloud chasing and even with fused Clapton's I haven't topped 70 watts in months.
First, I'll be honest. I don't get the 200W thing. If you insist on using crazy high power, at least try to be safe and use authentic batteries that have been properly tested. Buy only from recognized vendors like Illum, RTD, IMR.
okay right lets forget all this about 200 watts lets say where ive been use to having a tfv8 vaping 120 to 150 ever since i started .. vaping at 75watts is too weak and i cant taste nothing anymore so i want to build something i can use on my alien over 100 watts i wont go much higher than that .. what can i build ?
You need to ignore the watts thing (as I stated in your other thread).
Start again, what sort of vape are you trying to achieve? The watts is irrelevant - it's about your build. Let us know what you want and we can help you build it.
Start again, what sort of vape are you trying to achieve? The watts is irrelevant - it's about your build. Let us know what you want and we can help you build it.
What Exactly are you using Build-wise right Now?
Number of Coils?
Type of Coil(s)?
Coil Ohms?
Wire Alloy Type?
Wire Alloy Gauge?
etc
- Status
