Problem I've been having..

[xSoyer]

So as a few of you know I got my Reo grand last week; unfortunately, I've been having a lot of issues with it.. namely with it just not firing after a short amount of time.. I've narrowed the issue down to it just not wanting to fire the Reomizer 2 when i have that as my atomizer..

The reomizer reads at 0.7 on my mvp2 and will fire fine for like one puff on my reo, then it'll just stop firing..

The 510 connections are clean. The battery connections have been scraped and noaloxed (It fires fine if i put a carto in it so it's really an issue with the connection between the reo and the reomizer..)

Any help is appreciated..

 

[Raynman]

Are your screws tight on your coil? Just a first guess.

 

[bushmaster]

One possibility is that you may have to back the center connector out on the RM2 a smidgeon.

 

[Kristian]

Try prying the top of the button off and see if it fires consistently without it. If it does, the former owner mashed the button top too far down on the button post. Stick a small piece of paper in the button top before putting it back on and don't mash the button.

I was having a similar issue with the one I bought off the classifieds and this solved the problem. I didn't try any other atties on it though. This might not be the issue, but its worth a try I think.

 

[yaypudding]

can you post a pic of the bottom of the rm2 from the side and the inside of the grand with the delrin cover off so we can see the state of the the firing pin..

I think kristian and bushmaster have narrowed it down to the most likely culprits.

 

[xSoyer]

Are your screws tight on your coil? Just a first guess.

Yeah they're tight, otherwise it wouldn't be reading it in my mvp2

One possibility is that you may have to back the center connector out on the RM2 a smidgeon.

How exactly do i do this?

Try prying the top of the button off and see if it fires consistently without it. If it does, the former owner mashed the button top too far down on the button post. Stick a small piece of paper in the button top before putting it back on and don't mash the button.

I was having a similar issue with the one I bought off the classifieds and this solved the problem. I didn't try any other atties on it though. This might not be the issue, but its worth a try I think.

This is a brand new reo.. i'm the first owner and haven't mashed the button.



Thanks everyone.

 

[nerak]

On the bottom of the RM2 there is a center post with a slot for a screwdriver. Turn it to the left just a little to drop the center post down.

May I ask, what batteries you are using? Are they button or flat tops?

 

[Kristian]

...This is a brand new reo.. i'm the first owner and haven't mashed the button...

I'm sorry. I had you confused with someone else. My bad.

 

[yaypudding]

the bottom of the rm2's center pin is slotted, so take a flat head screwdriver and turn it so that it protrudes ever so slightly from the bottom.

 

[xSoyer]

On the bottom of the RM2 there is a center post with a slot for a screwdriver. Turn it to the left just a little to drop the center post down.

May I ask, what batteries you are using? Are they button or flat tops?

MNKE 18650s they're flat (Tried to use an AW 18650 button top i had and it also didn't work)

That's how far out it is now

 

[redeyedancer]

The atomizer is fine no need to adjust the post . Why its not working I cant tell you from over the net . If you have a standard atomizer or carto try it if its working fine then we no its the atomizer .

 

[redeyedancer]

Allot of great suggestions here . If you have tried everything and your still having problems send the unit to me I will solve the problem .

Please put
a note with your email address and a brief description of the problem .Also
empty any e juice in the mod and remove the bottle .It helps to put a tissue
or napkin around the tube .

Reos Mods LLC
120 Ida Jim Rd
Alfred Me 04002

 

[xSoyer]

Allot of great suggestions here . If you have tried everything and your still having problems send the unit to me I will solve the problem .

Please put
a note with your email address and a brief description of the problem .Also
empty any e juice in the mod and remove the bottle .It helps to put a tissue
or napkin around the tube .

Reos Mods LLC
120 Ida Jim Rd
Alfred Me 04002

:/ thanks, i might have to end up doing this. going to see if a new coil will magically fix it after work.

 

[xSoyer]

Just needed a new coil -_-

Sometimes it's the simple things.

Thanks everyone for your help.

 

[yaypudding]

glad to see it wasn't something major and that you're back up running again.

 

[redeyedancer]

I would have bet money it was the atty but you never no . Glad your up and running

 

[xSoyer]

I would have bet money it was the atty but you never no . Glad your up and running

Yeah, it's a little weird, but I'm not complaining. The difference now that it's "fixed" is literally night and day.

I love this thing.

 

[Matthee]

Glad you got that sorted. Has never happened to me, but can imagine it must be the pits if one's Reo is not working. Touch wood.