Spring collapse(s), no short in the Reomizer

[jemkos]

Hey guys, need some help trying to figure out the issue. I got a new Grand a week or so ago along with a new Reomizer. Built the coil, loaded it all up and I couldn't get it to fire. After pressing the button 2-3 times, the spring rapidly collapsed (with a tiny poof of smoke). I figured I must have missed a short in the coil and ordered a new spring.

It arrived today, swapped it out and built a new coil. Triple checked it, ohm reader put it at 1.22 ohms with no problems. Loaded it up and the same thing. No fire, then as soon as I made a firm connection with the battery - poof. I know it's not the Reomizer, because it's running fine on my Mini.

I only have one more spare spring, so I don't want to fiddle with it without some help. Any ideas?

 

[JC Okie]

Are you using a metal drip tip? Sometimes the atty will check out, but when you put the cap on, the bottom of the drip tip will touch one of the posts. Test the RM2 with the cap and drip tip on before you put it on the REO. Or, use a delrin/plastic drip tip.. Worth a shot.

 

[redeyedancer]

Hey guys, need some help trying to figure out the issue. I got a new Grand a week or so ago along with a new Reomizer. Built the coil, loaded it all up and I couldn't get it to fire. After pressing the button 2-3 times, the spring rapidly collapsed (with a tiny poof of smoke). I figured I must have missed a short in the coil and ordered a new spring.

It arrived today, swapped it out and built a new coil. Triple checked it, ohm reader put it at 1.22 ohms with no problems. Loaded it up and the same thing. No fire, then as soon as I made a firm connection with the battery - poof. I know it's not the Reomizer, because it's running fine on my Mini.

I only have one more spare spring, so I don't want to fiddle with it without some help. Any ideas?

I have a feeling the center post on the atomizer is not protruding enough . I caught one of my guys not setting them properly . What happens is the threaded part of the atomizer the negative is making contact with the center post in the mod . I wont no until I see the atomizer but that is my best guess . It would help if you could show me a picture of the base of the atomizer

 

[jemkos]

That could be the problem, I just looked at the center post and it seems pretty flat. I can test out my last spring using a different atty. How can I adjust the center pin to protrude more?

 

[Filthy-Beast]

If you've got a meter with leads, you can check the entire system for shorts. With no battery installed touch the leads to the spring plate and the firing pin.

 

[jemkos]

Looks like the atty is the problem. Switched out the spring and loaded it with another Reomizer and it works fine. So, now I just need to lower the pin on the other one.

 

[Filthy-Beast]

That could be the problem, I just looked at the center post and it seems pretty flat. I can test out my last spring using a different atty. How can I adjust the center pin to protrude more?

with a flat blade screw driver turn the center pin counter clockwise until it looks like your other RM2.

 

[jemkos]

with a flat blade screw driver turn the center pin counter clockwise until it looks like your other RM2.

Tried that, there aren't really noticeable grooves in the pin to grip the screwdriver, just the center hole.

 

[redeyedancer]

Tried that, there aren't really noticeable grooves in the pin to grip the screwdriver, just the center hole.

We use a small round point file . If you cant back the post off send it to me I will adjust it. I will also send you some springs and some extra buttons for the aggravation .

 

[Wickeddeuce]

We use a small round point file . If you cant back the post off send it to me I will adjust it. I will also send you some springs and some extra buttons for the aggravation .

Now that is customer service!!! Wow!

Rob you ROCK!!!

 

[DoogieTony]

Now that is customer service!!! Wow!

Rob you ROCK!!!

Fo' Real........

 

[jemkos]

We use a small round point file . If you cant back the post off send it to me I will adjust it. I will also send you some springs and some extra buttons for the aggravation .

Oh wow, thank you, you don't have to do that. Your customer service is outstanding, thank you very much! Even if I hadn't already ditched all of my other mods (over a dozen) for Reo's, I would now just because of your amazing way of running your business.

I'll definitely find something that works when I get home after work, I'll bust out the big tool box and get to fiddling. Thanks again, I really appreciate the help!

 

[redeyedancer]

Oh wow, thank you, you don't have to do that. Your customer service is outstanding, thank you very much! Even if I hadn't already ditched all of my other mods (over a dozen) for Reo's, I would now just because of your amazing way of running your business.

I'll definitely find something that works when I get home after work, I'll bust out the big tool box and get to fiddling. Thanks again, I really appreciate the help!

I still feel like I oh you a couple springs just pm me your email I am happy to do it . No worries I will take it out of the hide of the guy that assembled it

 

[yaypudding]

Feed him to the porcupines!!!!!!!!

 

[MichelleOhio]

He must be the same one that packed my two incorrect orders.

 

[tmel]

He must be the same one that packed my two incorrect orders.

Yeah...it took me 3 shipments to get my order of bottle/tubes. I now have more spare bottles then I know what to do with...they just kept coming without the tube and cap! lol.

I do appreciate having 5 filled bottles ready to go though