Problem with Kanger Top tank minin

[H Vap]

Hi
im using Kanger toptank mini.Dew hours a go,i tired to make kanthal coil ,using 28AWg kanthal with 5 wraps it gave me .9 and on 20 watt it had been burned and milted .Also the screen shows 9.99Houm and after i change the coil it still stoped working and dose not updates the resistant reading .restarting ,removing the battery and return it nothing is working .
Is there any Idea

 

[OhTheAgony]

It is really difficult to read that, it would be a lot easier to help you if you took the time to type that up properly.

What I get from that is that you had a 0,9ohm resistance initially and then later it read 9,99ohm, correct?

Loose screw perhaps, or a broken leg? It appears your coil isn't making contact anyways, try tightening it again. If that doesn't work it could be your center-pin isn't connecting properly.

 

[retired1]

Moved to New Members

 

[Down-Time]

Remove the topbox mini. Is the topbox atomizer/coil at room temp? Make sure you have the correct settings for the atomizer/coil you are using. Attach the topbox mini.

Use the up/down button to answer, "Is this a new atomizer?"

After answering the question, press down and release the fire button quickly. Does it still show 9.99 ohms? It should show the correct ohms.

 

[suprtrkr]

9.99 ohms means the coil is broken or not making contact.

 

[BrotherBob]

Welcome and glad you joined.