Proper dripping method.

Status
Not open for further replies.

paulspikey

Super Member
ECF Veteran
Verified Member
May 22, 2009
474
18
Henderson, KY USA
I am having trouble dripping my GG. When I dripped my 510, I would always drip a couple of drops onto the cartridge filler material, and a couple on the steel wool part of my atty and it worked pretty good.

On my GG I have been trying the same method, but I keep getting liquid in my mouth and misfires caused by "flooding" I am using a 901 atty with the cigar type flat mouthpiece cartdridge. I also use the coffee straw mod on all of my cartridges.

The reason I say flooding is because liquid keeps escaping through the tiny (carberator?) hole down toward the battery end of the atty.

Thank you.
 

Stormynights

Vaping Master
ECF Veteran
Verified Member
Mar 31, 2009
3,232
200
Bristow, Ok.
I am having trouble dripping my GG. When I dripped my 510, I would always drip a couple of drops onto the cartridge filler material, and a couple on the steel wool part of my atty and it worked pretty good.

On my GG I have been trying the same method, but I keep getting liquid in my mouth and misfires caused by "flooding" I am using a 901 atty with the cigar type flat mouthpiece cartdridge. I also use the coffee straw mod on all of my cartridges.

The reason I say flooding is because liquid keeps escaping through the tiny (carberator?) hole down toward the battery end of the atty.

Thank you.

Blow through the mouth piece to get out the excess juice. I only drip on the atty to prime it when it is new. I just keep my carts topped off after that. When juice comes out the hole it is flooded. Blow out the atty and it should be fine.
 

mamu

Ultra Member
ECF Veteran
Verified Member
Mar 29, 2009
2,551
1,523
IN USA
I totally converted to dripping last week-end. I am SO done with carts!

I got so tired of putzing with the cart and the filler.

I drip 3 drops on my 510 atty and I'm good for around 5 puffs.

I drip 5 drops on my 801 atty and I'm good for around 9 puffs.

I've found the flavor comes through so much better with just dripping.

You do have to watch the amount of puffs though - that burnt atty taste is mighty awful at 6 volts.

How you take a drag is also important I think.

I press the button...
I start the drag...
After 2-3 seconds, I let go of the button and continue dragging for 1 more second...
Then I inhale.

If you don't inhale til the drag is done you get the full effects.

It's absolutely vaping heaven!!
 

Di

ECF Guru
ECF Veteran
Oct 30, 2008
10,164
16
*Australia*
I totally converted to dripping last week-end. I am SO done with carts!

I got so tired of putzing with the cart and the filler.

I drip 3 drops on my 510 atty and I'm good for around 5 puffs.

I drip 5 drops on my 801 atty and I'm good for around 9 puffs.

I've found the flavor comes through so much better with just dripping.

You do have to watch the amount of puffs though - that burnt atty taste is mighty awful at 6 volts.

How you take a drag is also important I think.

I press the button...
I start the drag...
After 2-3 seconds, I let go of the button and continue dragging for 1 more second...
Then I inhale.

If you don't inhale til the drag is done you get the full effects.

It's absolutely vaping heaven!!


wow, mamu

that was so nicely explained,
it sounds perfect,
too much so, in fact, almost sensual ----- ha ha ha ---:wub::wub:
 

truelove

PV Casanova
Supporting Member
ECF Veteran
May 2, 2009
2,359
9
Bronx, NY
I am having trouble dripping my GG. When I dripped my 510, I would always drip a couple of drops onto the cartridge filler material, and a couple on the steel wool part of my atty and it worked pretty good.

On my GG I have been trying the same method, but I keep getting liquid in my mouth and misfires caused by "flooding" I am using a 901 atty with the cigar type flat mouthpiece cartdridge. I also use the coffee straw mod on all of my cartridges.

The reason I say flooding is because liquid keeps escaping through the tiny (carberator?) hole down toward the battery end of the atty.

Thank you.
As long as you only put 3 drops on the mesh after you blow out the 901, it will never happin again.
Only 3.
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
I totally converted to dripping last week-end. I am SO done with carts!

I got so tired of putzing with the cart and the filler.

I drip 3 drops on my 510 atty and I'm good for around 5 puffs.

I drip 5 drops on my 801 atty and I'm good for around 9 puffs.

I've found the flavor comes through so much better with just dripping.

You do have to watch the amount of puffs though - that burnt atty taste is mighty awful at 6 volts.

How you take a drag is also important I think.

I press the button...
I start the drag...
After 2-3 seconds, I let go of the button and continue dragging for 1 more second...
Then I inhale.

If you don't inhale til the drag is done you get the full effects.

It's absolutely vaping heaven!!


Mamu, I have stop the cart filling months ago. I have notice that like paul I had liquid to my mouth.
The method you use for inhaling is the best!!! Keeps attys alive and you take the best from GG. Your method must be written to the GG directions:D
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
Yeah! Stuff those damn carts I drip too! 3 drops for me in 901 atty at 6 volts, 2 is good for 3.7 volts! If its a pen cart, I also drip 3 and less chance of flooding!

Thats right for me Tribal!! We will be saved from this "cart refilling" with AFS once for good
 

mamu

Ultra Member
ECF Veteran
Verified Member
Mar 29, 2009
2,551
1,523
IN USA
Hey guys thanks for the advice. I ended up taking the filler material out of the cartridge and now am dripping directly on the atty only. I am getting less liquid in my mouth, but I am still getting misfires....any suggestions?

Paul - GG misfiring is usually caused by the bottom of the button not making good contact with the GG case due to build up of residue.

You will need to clean the button to restore good contact between the bottom of the button and the GG case.

You'll need 1000 grit sandpaper. Cut a strip 1/2 inch x 5 inch and fold in half. I purchased mine at Auto Zone.

Here's a video Imeo did to show you how to do it:
YouTube - VOICE VIDEO CLEANING GG 2
 

grimmer255

Vaping Master
ECF Veteran
Jul 5, 2009
3,271
12
somewhere out there......
I totally converted to dripping last week-end. I am SO done with carts!

I got so tired of putzing with the cart and the filler.

I drip 3 drops on my 510 atty and I'm good for around 5 puffs.

I drip 5 drops on my 801 atty and I'm good for around 9 puffs.

I've found the flavor comes through so much better with just dripping.

You do have to watch the amount of puffs though - that burnt atty taste is mighty awful at 6 volts.

How you take a drag is also important I think.

I press the button...
I start the drag...
After 2-3 seconds, I let go of the button and continue dragging for 1 more second...
Then I inhale.

If you don't inhale til the drag is done you get the full effects.

It's absolutely vaping heaven!!
i do that with my 510 and 801 both manual and it works great....
 

BiteMe

Ultra Member
ECF Veteran
Mar 31, 2009
1,431
2
Stanwood, WA
Dripping seems way to much like some drug adiction to me. I'll stick with the carts lol


I'm gonna appologize in advance here in case I offend you Cheech, because I for one just find it too funny. But with a screen name like "Cheech and ...." to say dripping seems like drug addiction is just so out there in left field!!!
I'm not by any means blasting You or your screen name....just pointing out the very twisted humor that I love!!!
You made my day with that one!!!:D
ROFLMAO!!!
 
Status
Not open for further replies.

Users who are viewing this thread