Protank 2

[ibndevilish]

I just got my provari in the mail set it up put the protank 2 on and get no vapor, unscrewed it a bit from the provari and got my reading of op which is for open, I have tried everything to get it to vap and nothing, so for the heck of it I had a old blu cartridge and tried that and got a rating of 3.2 omhs I guess that is what it is, any suggestions of how to get the protank 2 to work?

 

[cloud.nine]

I don't have a provari, i've got an SVD, so I don't know anything about provaris connecting with protanks, but, are you sure the head in the protank is good? try changing it out, maybe it's a dud?

 

[ibndevilish]

it finally started working I just some where on here about pulling the pin down which I did and it worked. I switched the head out and the other one didn't want to work either..So will also try it on that one..but thanks for the reply

 

[mrbillcollecta]

I don't have a provari, i've got an SVD, so I don't know anything about provaris connecting with protanks, but, are you sure the head in the protank is good? try changing it out, maybe it's a dud?

What he said. ^

 

[EBates]

You failed to mention the resistance of the protank atomizer when it was failing to vape.
Was the draw the normal airy draw normally associated with the protank or was it a very tight draw?
Had the protank been primed?

 

[ibndevilish]

I had no draw at all..When I pressed to see what the omhs were guess that is what ya call it provari showed op which is open..So I found some place on here about the tank and did what it said and boom it works..

 

[ertlandia]

I have a few protank 2's (each with a different flavor) One of the protank's machining was off and the base did not line up strait. It caused the pin to not make proper contact or short out. I swapped out the base with a second base and it lined up correctly and fired. I have switched to the kanger airflow control base.

If you look at your protank does it sit strait or is it look kind of bent?

 

[ibndevilish]

it's straight up and I guess I fixed it as it's working like a charm..I think I'm gonna like the tank it's easy to use..When I change my juice out I'm going to do what I did to the first one and hopefully it will work also..