provari and DCT

[tech180]

I have a provari on order and I was planning on running a DCT map tank on it. However, on clouds of vapors instructions it says dual coils are not recommended? I was going to run 2.5 and 3ohm in my DCT.

Anyone have any issues running dual coils with the Provari?

If so, is there single coil XL cartos that will fit in the DCT MAP?


P.S.

I prob wont get a response since I am forced to post in the newbies thread and anyone with experience can't respond to this. Sucks!

 

[Vapoor eyes er]

I have a provari on order and I was planning on running a DCT map tank on it. However, on clouds of vapors instructions it says dual coils are not recommended? I was going to run 2.5 and 3ohm in my DCT.

Anyone have any issues running dual coils with the Provari?

If so, is there single coil XL cartos that will fit in the DCT MAP?


P.S.

I prob wont get a response since I am forced to post in the newbies thread and anyone with experience can't respond to this. Sucks!

You now have 5 posts. Wait 1 hour and you'll be able to post anywhere.

You can't run 1.5 DC but 3.0 are fine. Just researching the addition of tank on my Provari. Apparently the Provari will cut it off if too low. Try a 2.0 or 3.0 ohm.
http://www.e-cigarette-forum.com/forum/provape/236827-provari-dual-coil-cartos.html

 

[misplacedsooner]

I have a provari on order and I was planning on running a DCT map tank on it. However, on clouds of vapors instructions it says dual coils are not recommended? I was going to run 2.5 and 3ohm in my DCT.

Anyone have any issues running dual coils with the Provari?

If so, is there single coil XL cartos that will fit in the DCT MAP?


P.S.

I prob wont get a response since I am forced to post in the newbies thread and anyone with experience can't respond to this. Sucks!

i think anyone can respond here.

 

[ScottinSoCal]

"People with experience" can respond, we just can't start new threads here. And you shouldn't have any problem with 2.5 or 3.0 ohm cartos. I use Boge 3.0 cartos every day, and it's the resistance, not the number of coils.

 

[misplacedsooner]

the lower the ohms the lower setting you will have to use like 3.4-3.7, found this out when i got my provari and acidentally stuck a 1.75 dc on it. it gave me the error screen but backed down to 3.7 and it ran all day then gave me an error again so i backed it down to 3.4 ad it was all good. ended up switching to 3.0 though so i could test juice at different voltage.

 

[TheJack]

i have 1.5 duals that i use on my Provari. i had ones that wouldnt let me go past 3.7v and others that went to 4v.

 

[tech180]

"People with experience" can respond, we just can't start new threads here. And you shouldn't have any problem with 2.5 or 3.0 ohm cartos. I use Boge 3.0 cartos every day, and it's the resistance, not the number of coils.

That's exactly what I was thinking also. It just said on their site not to use dual coil for some reason. All adding more coils will do is change the resistance, and as long as the resistance is 2.5 to 3.0 it should be fine, one would think.

Any idea why they say not to run them?

 

[tech180]

i think anyone can respond here.

Ahhhh ok, good

I thought you all couldn't, but as said above, you just cant open new threads.

 

[ScottinSoCal]

Any idea why they say not to run them?

When the DC cartos first came out, they were all 1.5 to 2.0 ohm, and those don't work well on the ProVari. That's when the warning got posted.

I tried dual coil and wasn't happy with them. I prefer a warmer vape, and the dual coils just couldn't give me that unless I really cranked the voltage, and then they tasted burnt. I hope you have better luck.

 

[Smugface]

If you want DC you could try these:

Smok Tech 3.0 OHM Steel Dual Coil Cartomizer

 

[tech180]

When the DC cartos first came out, they were all 1.5 to 2.0 ohm, and those don't work well on the ProVari. That's when the warning got posted.

I tried dual coil and wasn't happy with them. I prefer a warmer vape, and the dual coils just couldn't give me that unless I really cranked the voltage, and then they tasted burnt. I hope you have better luck.

Perfect! I knew it had to be some reason like that. I found some XL 2.6ohm singles I just ordered, along with the 2.6 and 3.0 duals. I will report back with some results once I receive them.

Thanks again for all you replies!

 

[tech180]

If you want DC you could try these:

Smok Tech 3.0 OHM Steel Dual Coil Cartomizer

I will give those a shot too.

I orderd these duals already.

510 XL Dual Coil Cartomizers - Steel 3 ohm

And

510 XL Dual Coil Cartomizers - Steel 2.5 ohm

 

[tech180]

i think anyone can respond here.

By the way, nice aquarium setup. I keep chiclids myself but my main love is stingrays and large monster fish.

 

[misplacedsooner]

By the way, nice aquarium setup. I keep chiclids myself but my main love is stingrays and large monster fish.

oh yes, and thanks, thats an old 110. for ever and ever i kept most all parachromis from dovii to freddies.... love umbees too. got a nice 240 in my living room.

 

[tech180]

oh yes, and thanks, thats an old 110. for ever and ever i kept most all parachromis from dovii to freddies.... love umbees too. got a nice 240 in my living room.

Awesome

I have 6 tanks running right now. 75, 210, 500, 600, 600 and a 3500 gallon. 600 is used for keeping my stingray pups, 3500 is their main tank and the others ones are for breeding the food for my rays. I have leo, henlies, perals and a few marbled motoros. My fish are arowanas and large cat fish but I also have different chiclids/tilapia I breed an duse for food for the other large fish.

If you get a chance check out live fish direct, they have hte best selection I have ever seen for rare chilids.

 

[misplacedsooner]

a silver aro is the only aro ive ever kept, he was a little over 2 foot. i also had a sweet 2 foot long p. niger cat i used to hand feed. always wanted to get into stingrays but never had the space to keep them.

 

[Murdock Ruml]

I got a dual coil that rings in at 1.6 that works on my provari. I can only run it up to 4.2V before it gives me an error.

 

[Danielsuzuki]

You could always punch an HH357 long barrel... Lol

 

[Seattle40]

I got a dual coil that rings in at 1.6 that works on my provari. I can only run it up to 4.2V before it gives me an error.

I have a dual coil in right now in a tank, and have the exact same readings, and 4.2 is the highest I can go, works great at that voltage..

 

[tech180]

I got a dual coil that rings in at 1.6 that works on my provari. I can only run it up to 4.2V before it gives me an error.

Does it vape pretty good at 4.2 with only 1.6? Any burnt flavor? I was just going to rip out the carts in there and replace them right away with the 3ohms but maybe I will give them a shot first.