Pulse G clone wont wick!

[dragoi90]

Hello guys.
I bought a pulse g clone from fasttech.
I wanted to try as auto dripper but the cotton wont wick.I put the coil horizontaly and verticaly and nothing.No wicking at all.Even the silica and eko-wool wont wick.
It wont even pour!
What do you guys think?
Should i open up the wick hole?
Make it bigger?

 

[classwife]

Moved to Rebuildable Atomizer Systems

 

[the4thpower3]

I just got one from FT too.
2mm ID 28awg tight coil with cotton. Wicks just as well as any other genny with cotton.
Thin cotton, fluffy, not compacted and rolled tight.
It's tricky to get the cotton just right.
Thicker in the coil - loose through the wick hole.
And leave one of the screws out of the deck.
I thought the fill port in the chamber reducer would be enough, but it's not.
I don't need to genny tilt.

I tried 400 mesh too. Worked fine.

 

[dragoi90]

I tried with mesh and i didnt had any problem with wicking!But with cotton is a big problem!I just tried thin and fluffy cotton and wont wick.Im going mad!(also left the screws out)


Sent from my VENATOR DESTROYER