Quality 3.7v Box Mods from $19 5v Box Mods from $28

Status
Not open for further replies.

jayquik03

Senior Member
ECF Veteran
Jun 21, 2010
197
7
41
syracuse
Thanks steve. I'm still a little confused so let me see if I understand a little bit. I have like 30 standard cartomizers (Which I believe are 2.8-3ohm boge, Same box and picture used @ KBV) that I want to use up. It's possible to use these @ 3.7v and @ 5v is this correct? Is there one of the other that these would be better on? I figure I'll use these up on whichever mod they would be best on and then buy Duals for the opposite mod for now. When I do buy Duals for my 2 mods (3.7v and 5v) 1.25ohm LR duals would be ok for the @3.7v and 1.5ohm duals would be good @5v? Man this is confusing lol.
 

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
No, your info on the dual coils is wrong.

for a 3.7 mod, the 1.5 ohm dual coils will be perfect. you may be able to use the 1.25s (if you already have them) but i think the 1.5's are the perfect ones for the 3.7 box mod.

Your regular ohm stuff should be used at 5 volts. Those boge 2.8 to 3.0 ohm cartos is all i use on the 5 volt box mod.

If you were going to try dual coils on the 5 volt, I would try and get 2.5 dual coils (if they even make them yet) 2.0 ohm dual coils may be a little hot at 5 volts, so if you are going to try them, just get one box of 2.0 dual coils for the 5 volt box mod.

using a 2.8 to 3.0 ohm boge on a 3.7 box mod will not produce much vapor at all. it just doesnt get hot enough.

Hope that clears it up.

Steve
 

jayquik03

Senior Member
ECF Veteran
Jun 21, 2010
197
7
41
syracuse
No, your info on the dual coils is wrong.

for a 3.7 mod, the 1.5 ohm dual coils will be perfect. you may be able to use the 1.25s (if you already have them) but i think the 1.5's are the perfect ones for the 3.7 box mod.

Your regular ohm stuff should be used at 5 volts. Those boge 2.8 to 3.0 ohm cartos is all i use on the 5 volt box mod.

If you were going to try dual coils on the 5 volt, I would try and get 2.5 dual coils (if they even make them yet) 2.0 ohm dual coils may be a little hot at 5 volts, so if you are going to try them, just get one box of 2.0 dual coils for the 5 volt box mod.

using a 2.8 to 3.0 ohm boge on a 3.7 box mod will not produce much vapor at all. it just doesnt get hot enough.

Hope that clears it up.

Steve

ok this is perfect information thank you. that will help me save money also lol. thanks again for taking the time :)
 
Running them for $10 a 5 pack with a $2.50 1st class shipping option or $27.50 for 3-5packs which comes to $30 shipped :). I planned on closing the store for 36 hours to catch up on order but will hold out another 1/2 hour. If you buy cartos only I'll have them out in the morning :) Go to the store link and the hardware drop down and you should see them.
 

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
Thanks Bob. You D man!


Running them for $10 a 5 pack with a $2.50 1st class shipping option or $27.50 for 3-5packs which comes to $30 shipped :). I planned on closing the store for 36 hours to catch up on order but will hold out another 1/2 hour. If you buy cartos only I'll have them out in the morning :) Go to the store link and the hardware drop down and you should see them.
 

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
heading into the workshop to finish up todays orders. I do have some time to fit in a couple more for shipping tomorrow. It may reach you by Saturday if you are West of the mississippi, at least a good chance of it with priority shipping. I will keep an eye on my PM's in case more orders come in, and also watch my gmail account. If you are not able to PM, send foxyboxmods an email at myboxmods@gmail.com

I have black 3.7 and 5 volt box mods ready for shipping in the morning. I can install the following colors of LED's at no charge: bright ... indigo blue, a gorgeous magenta, green, red, and periwinkle. I also have an orange LED 5v already built.

5 volt kit: $46
3.7 volt kit: $37

5 volt kit includes a 5 volt box mod, (2) 14500 batteries, charger, KBV juice sample and Boge cartomizer.

The 3.7 volt kits includes the same.

PM me or visit my website at:foxyboxmods.com - Home.

Here is a video I did on both the 3.7 and 5 volt box mods.

 

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
i would say 4 hours, but isbnbook said he got 12 hours out of moderate vaping. i would not leave the house without a spare charged set for a full day. when i get home at night I immediately pop the spent set on the charger, and pull them off after the light turns green (2 hours or a tibble more) and then top off the second set before going to bed. Never run out that way. I like to meter my batts when they come off the charger.

Read the included thorough instructions for some good info.

Steve
 

Godzilla

Unregistered Supplier
ECF Veteran
Sep 3, 2010
2,624
1,024
Northern California
www.foxyboxmods.com
Sure would. I saw one at radio shack slightly nicer and it was $20 so that seems like a good buy. The one you linked measures ohms and dc, which basically is the left side of that dial. That is likely all you will use. Checking batteries, and checking the ohm ratings of cartos. i think my instructions tells you how to do it, if not give me a call, or email or pm me. my phone number is on my website under contact us.

Steve
 

ISBN

ECF Guru
ECF Veteran
Oct 31, 2010
11,317
22,162
Happy Dale Sanatorium
i would say 4 hours, but isbnbook said he got 12 hours out of moderate vaping. i would not leave the house without a spare charged set for a full day. when i get home at night I immediately pop the spent set on the charger, and pull them off after the light turns green (2 hours or a tibble more) and then top off the second set before going to bed. Never run out that way. I like to meter my batts when they come off the charger.

Read the included thorough instructions for some good info.

Steve

Plus ++ There was about 3-4 hrs. sleep in there somewhere...:blink::blink::blink:

That knocks it down to eight hrs.

I was also working on the computer most of the time, with a vape here and there... Sometimes more sometimes less.

I vape a lot less while I'm working.



I'm still in the testing phase...

My first full day with the 5v BoxMod was June 1st. :)



So far:

I like that it's light, it fits in my hand really well and a vapor that kicks like a mule!!!

... Oh yeah the blue led does light up a room!!! :lol::lol::lol:
 
Status
Not open for further replies.

Users who are viewing this thread