I've found over the past week or so that I'm definitely at a k guy. I've been using a dripper for the past few days because my Aerotank is no longer cutting it all the time and the kayfun lite I got has given me nothing but problems. It floods immediately. Any tips on filling a kayfun? Also, I've been told by a couple different people that orchid and fogger are much more reliable and easy to use?
Rba's leaking/flooding
- Thread starter beh97
- Start date
- th_trl_thread_readers 0
- Status
Kayfuns shouldn't leak. Fill it through the fill hole, top filling almost always makes them leak.
I agree with the above post. Trying to fill them through the top requires more effort than it's worth. The blunt needle tip bottle is a worthy investment.
I haven't used either of the two RTA's mentioned, but I've heard the fogger has a bit of a learning curve on the build. From the general consensus and my experience, the kayfun should be an easy and reliable atty. However if it is still flooding, and you're top filling it then you should check to make sure the cotton isn't directly in the juice channels. Also avoid filling it directly to the top although that usually causes trouble with wicking rather than flooding.
I haven't used either of the two RTA's mentioned, but I've heard the fogger has a bit of a learning curve on the build. From the general consensus and my experience, the kayfun should be an easy and reliable atty. However if it is still flooding, and you're top filling it then you should check to make sure the cotton isn't directly in the juice channels. Also avoid filling it directly to the top although that usually causes trouble with wicking rather than flooding.
I have both a Kayfun and a fogger. I bottom fill both with a hypodermic needle, and the kayfun never leaks but the Fogger does sometimes through the air holes. I'm pretty sure it's a coil build or wicking issue on my end.
- Status
Similar threads
