RDA RDA for istick 30w?

[mavap]

Hey
I'm new here want to try dripping and looking for recommendations
After some research I found mutation x v3 is the best for clouds and good flavor, will it work great on istick 30w? Or do you recommend upgrading the mod?
I want a setup that will last for at least a year and produce great clouds.

 

[Das Auto]

Search around a little bit more, you'll find several threads with Many, Many recommendations.
For your first atty, pretty much, you can throw a "dart" on any website and buy any atty and you'll learn what works and what doesn't. What works for You and what doesn't. What You like and don't like. Then you will try out other Drippers, and then others, its inevitable! It will never be Once and done.

Good luck

 

[mavap]

I just don't want to waste money trying things around. I decided to get mutation x v3, play with it and go from there. I'm just not sure if 30w is enough power.
Thanks

 

[Herbertos]

IMO it is not enough power....i started with Infinte CLT V2 on that 30W Istick....tried it for a few Days and decided to buy a device with a lot more Power. I think 30W is not enough to get the Last out of your RDA.

 

[mavap]

IMO it is not enough power....i started with Infinte CLT V2 on that 30W Istick....tried it for a few Days and decided to buy a device with a lot more Power. I think 30W is not enough to get the Last out of your RDA.

That's why I posted here& so I guess I'll upgrade the mode.
What mod did you get and you think is perfect?

 

[Herbertos]

I got the Smok XPro M65 now. I like it. It has enough Power to play around with some different builds. For me it works perfect.

 

[DarkEgo]

IPV mini v2 also presents a good value for a 70 Watt single 18650. I would also look at the various sigelei mods and the ipv3. Remember you will also need battaries and a charger with any of these. The istick 50w would be a good one with internal battaries, but personally I would look for an atty with less airflow for a 50 Watt device. Maybe a derringer or a freakshow if you don't mind a little leaking at first. There are many other older attys with reduced airflow as well.

 

[mavap]

After a little research I think sigelei is the best but I'll have to drop some extra cash to get the whole setup (rda, batteries and charger) I'll start building on my istick 30w for now and move on while getting more comfortable

 

[Kurr]

I run my mutation x v3 on an istick 20w.

I cant use lower builds( >1 ohm) , but right now I am running a dual nano coil with 30ga kanthal @ 1.2-1.4 ohms and im getting huge clouds and flavor with fast heat up.

 

[mavap]

I run my mutation x v3 on an istick 20w.

I cant use lower builds( >1 ohm) , but right now I am running a dual nano coil with 30ga kanthal @ 1.2-1.4 ohms and im getting huge clouds and flavor with fast heat up.

That makes me more excited for mutty to arrive and play with it

 

[tBERGz]

I dripped on an "IGO-W" on my iStick 30w for a little bit. I ran a single .8ohm coil on it, and produced some good clouds. Has small airholes too so it worked good on my iStick. Just recieved my new SMOK Xpro m80 plus, so am now looking for a new RDA.

 

[socalsailor]

I'm running a Mutation X v3 on my iStick 30W, and I have it built with a single parallel coil of 30g A1, 11 wraps, 1/8" ID at 1.8 ohm. At 30W, response time is great and I have enough battery to puff all day on it.

That said, I have an Arrow 100W mod on the way with an Aeolus clone from FT, since the iStick/Mutation combo doesn't allow me enough flexibility to play with heavier wire guages or dual coils.

Good luck with your setup; you can get good results with the iStick, you just have to understand how to build to its strengths. It took me several days of building, rebuilding and adjusting to find its sweet spot.

 

[Robert Cromwell]

I run my mutation x v3 on an istick 20w.

I cant use lower builds( >1 ohm) , but right now I am running a dual nano coil with 30ga kanthal @ 1.2-1.4 ohms and im getting huge clouds and flavor with fast heat up.

yep the smaller wire heats up pretty much instantly.

 

[javyn]

30W isn't enough to get the good out of a Mut X IMO. For something like that I'd get a Magma. Good clouds and amazing flavor.

 

[socalsailor]

30W isn't enough to get the good out of a Mut X IMO. For something like that I'd get a Magma. Good clouds and amazing flavor.

30W isn't enough power to get amazing performance on a build like a .35 ohm 24g dual coil, but if you build high resistance with a small mass of wire like a 28 or 30 gauge single coil, it holds its own. That's the beautiful part of VV/VW devices. You can adjust build resistance and power to achieve a heat flux value that gives you the performance you want.

 

[Chris26]

http://www.vaporbeast.com/focus-hobbit-rda.html hobbit rda, fit perfect on istick.

 

[mavap]

I actually got the mutation x v3 and it's amazing and very satisfying with 0.9 ohm at 27w. I tried different builds and I liked the parallel single coil using 28 g kanthal


It makes me want to upgrade the mod to maybe ipv mini v2. But I don't want to upgrade more and go lower with ohm then buy more juice

 

[reindeer]

My Magma likes to sit on my iStick 30W at 1-1.3 ohms.

 

[Brandon David]

I've run my veritas on my 30w before and it did fine. It's all about the build.

 

[MattyTny]

If you have a smaller amount of wattage to work with you can always try a smaller chamber atomizer. The istick amperage limit wont let you build very low, but you can get a good vape from a smaller chamber like the Vertex v2 or something similar.