RDA question for VV set up

Status
Not open for further replies.

BigDoctorJ

Full Member
Jan 13, 2014
31
15
California
I have a question. I have a dual coil igo w reading 1.3 ohms. Micro coil with 12 or 14 wraps (can't remember). It's on my vamo and I like it at 6v. From what I've read I'm really in an unsafe amp level right? I'm not burning out anything and the vape is awesome. batteries are safe chemistry. Thoughts?


Sent from my iPhone using Tapatalk
 

Zealous

Ultra Member
ECF Veteran
Verified Member
Jan 20, 2012
1,198
1,678
Texas
What's the amp limit on your battery? the amps for that set up is 4.62. That's pretty high watts. I think the 1.3 ohm coil would fire on the vamo if your battery amps are good for it but that's just a really high wattage. Are you sure you didn't mean 6 watts?

edit: oh yes, I forgot vamo only does volts so never mind on the watts question.
 
Last edited:

BigDoctorJ

Full Member
Jan 13, 2014
31
15
California
1.3 ohms at 6V is drawing 4.6 amps without taking regulator loss into account. The Vamo has a 5 amp limit. You're not going to hurt the Vamo doing this. If it is a bit more than 5A, it will limit it. Which batteries are you using?

Switching back and forth between stacked efest 3.7v 800mah imr 18350 and one 18650


Sent from my iPhone using Tapatalk
 

BigDoctorJ

Full Member
Jan 13, 2014
31
15
California
What's the amp limit on your battery? the amps for that set up is 4.62. That's pretty high watts. I think the 1.3 ohm coil would fire on the vamo if your battery amps are good for it but that's just a really high wattage. Are you sure you didn't mean 6 watts?

Not sure what the battery amp limit is. And yes I meant 6 volts. The vamo only does voltage


Sent from my iPhone using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread