RDAs with huge airflow (stock or fairly easily modded) + juice well?

[Dissonance]

So far I've tried the MXv2 (I love it, currently what I use all day every day), the Mephisto (I like it, but the draw is tight... Good with the MX topcap, but the clones I've got strip out crazy easy), and I have a Dark Horse on the way. I'm not a fan of the plumeveil; just too messy. Trying to stay 18650, but may consider 26650 if it seems worth it (Tried the Cerberus, and not interested)... Looking for something that can handle ~.08-1.0Ω coils (on the rare chance I use a regulated). Any suggestions?

 

[Necrotic]

The dark horse is good

 

[readeuler]

Stillare + Chuff-style topcap was too airy for me at first. Of course, upping the wattage until I'm choking on vapor helped I like the cyclops-style as well, I've got some fairly wide coils in it now, and I know they're getting even airflow.

It's got a pretty darn deep juice well, in my opinion (well, not so much a well, as that the deck can handle quite a bit of liquid sitting). vaping a bit under 0.3ohms on a mech, and it can definitely handle it.

 

[Neolithium]

CLT v1 is pretty airy, or you could go TOBH style and drill the 3 holes out on each side to a larger size, or cyclops them too, if that's more to your liking. One thing that could fix the messy plume veil is trying a few different wick setups. I know with organic cotton the holding of juice wasn't that great. Japanese isn't bad either, but for pure storage in a dripper I loved rayon, it would just soak it up, not expand all weird either. Get a nice fluffy setup going on them and you should be rather clean with the PV.

 

[dravell]

CLT V2 Plus and the Little Boy are my two favorites right now for mass airflow. Doge, Mutation X and Dark Horse are on the shelf now.
The Airek has just ridiculous holes too, probably the biggest on the market right now if thats what youre looking for.

 

[Dissonance]

Stillare + Chuff-style topcap was too airy for me at first. Of course, upping the wattage until I'm choking on vapor helped I like the cyclops-style as well, I've got some fairly wide coils in it now, and I know they're getting even airflow.

It's got a pretty darn deep juice well, in my opinion (well, not so much a well, as that the deck can handle quite a bit of liquid sitting). Vaping a bit under 0.3ohms on a mech, and it can definitely handle it.

Actually lately I've been stuck on a kinda quad coil setup... 2 coils, either 6 or 8 wraps, then bent in half so each one becomes 2 vertical coils. Been doing this with 22g N80, spaced coils to maximize use of airflow and it's great. Not sure how it would work with cyclops airflow tho since the coil is more of a block so not real sure about the CLT or stillair... Not a big fan of the Tobh (I have a 26650 version, it's OK... Just too small of post holes). Haven't checked out the little boy yet, but I'll google it and check it out ^_^

 

[SLIPPY_EEL]

plumeveil with the barrel upside down and a chuff on top eliminates the messyness of the atty and also imo opens it even more as you are using 2cyclops and 6 holes.

i have an 'HolyGrail' same as a Doge which has big airflow slits which can be adjusted but the deck is about the same depth as the Tobh, MX & Plumeveil.

i also have the big bro of the HolyGrail/Doge which is the Cali>> https://www.fasttech.com/products/1971600 which has massive adjustable slots, one of my favourite attys!! the deck isnt as deep as the cerb or asmodus but if you wick with this in mind it doesnt make alot of differance.

i have a couple of Airek's on the way, shud get in nxt few days, they have massive air and the internals look like an MX>> https://www.fasttech.com/products/2045801

 

[jamal01]

The dark horse is good

I agree the dark horse is great. The top cap can be used to create a large drip well and you can drip through the top and it holds a lot of juice!

And the post holes are lovely, I hate struggling to get those things in

 

[SLIPPY_EEL]

is this big enuff?>> hehe

Airek with chuff style topcap

 

[calliber08]

I have a dark horse and a doge v2 and i think they both have great air flow but thats just me.

 

[KingsUSA]

Dark Horse is really nice but gets hot for me, mutation x has amazing airflow and for sure stillare + chuff

 

[calliber08]

What is your take on the vertex V2? Ive done some reaserch on it and that thing sounds bad. Good everything as far as i can tell, and an authentic is like 85 bucks.

 

[Sykriss]

The CLT v2+ has 3x12mm airflow slots on both sides, plus plume-veil style negative post airflow that DOESN'T leak since it's raised above the top of the juice well edge. Also, for anyone who wants to use their normal 510 drip tips on the v2+, just take one of the smaller included o-rings and double it up on your drip tip's connector. Fits right into the chuff enuff cap that comes with it.

 

[Raguvian]

What is your take on the vertex V2? Ive done some reaserch on it and that thing sounds bad. Good everything as far as i can tell, and an authentic is like 85 bucks.

It is great for flavor production. I'm not a cloud chaser but it puts out more vapor than the Veritas. I am only running it in single coil mode but it has a decent size juice well (bigger than the Dark Horse) and giant airflow options.

 

[Onelist140]

I've been playing with a Little Boy (that sounds horrible) 1:1 clone for a few weeks now and it's handled every wonky build I can throw at it. Though it's not as airy as The Doge and a tighter workspace, IMO it produces alot better.

 

[Nuchuga]

Dark Horse, Airek, Doge, Mutation!

 

[Str8Jacket J]

I get a little better airflow through my Plumeveil than through my buddies Little Boy as long as i have all the airways open (including the insulator that holds the drip tip). And has better flavor too.

 

[Seth McCandless]

I use a dark horse with a chuff and I absultely love it! Consider looking into the mutation x v4!