Re: UFS refilling juice

[Painfreak]

I just got my UFS and I'm still trying out. How do I actually refill the juice in the tank if it's running low? I try Unscrewing the top part of UFS and all the juice went into the CT. Is it normal? And if there juice is in the CT and not in the tank itself can I still vape on? Thanks for clearing my doubt!

 

[jools]

i just make sure the juice control and CT ar Fully closed and then take the cap off and fill, never had any trouble with flooding this way, yeah you can vape it but imo its not as nice , if i ever flood during use i just blow out the juice ( from the 4 holes under CT) and continue to vape normal,
im sure someone could explain things better than me tho as i have only had mine about 6 weeks HTH tho

 

[Painfreak]

i just make sure the juice control and CT ar Fully closed and then take the cap off and fill, never had any trouble with flooding this way, yeah you can vape it but imo its not as nice , if i ever flood during use i just blow out the juice ( from the 4 holes under CT) and continue to vape normal,
im sure someone could explain things better than me tho as i have only had mine about 6 weeks HTH tho

When u take off the cap isn't the atty will get unscrew too? Cause when I open it up the top, the atty with the 510 extension is stuck to the top cap with together with the o-ring under the mouth piece.

 

[Rick.45cal]

Painfreak, you need to make sure when you screw the atty in initially that the juice control is open (down position) then close it so it seats below the atty. You also need to put vaseline on the o-ring under the mouth piece that way it doesn't stick and unscrew your atty

 

[jinoo]

When u take off the cap isn't the atty will get unscrew too? Cause when I open it up the top, the atty with the 510 extension is stuck to the top cap with together with the o-ring under the mouth piece.

Just like what Rick has said, you need to put enough vaseline on the o-ring under the mouth piece. That thing happened to me once when I did not put enough vaseline on the o-ring.

 

[Painfreak]

Just like what Rick has said, you need to put enough vaseline on the o-ring under the mouth piece. That thing happened to me once when I did not put enough vaseline on the o-ring.

Painfreak, you need to make sure when you screw the atty in initially that the juice control is open (down position) then close it so it seats below the atty. You also need to put vaseline on the o-ring under the mouth piece that way it doesn't stick and unscrew your atty

ok so i have to screw the atty tight? so when everything is done and i wan to refill the juice, i unscrew the part above the clear window to fill it up? ok will put more vaseline on the o-ring.

 

[imeothanasis]

Pain, the right way is this:

close air control and liquid control
unscrew the mouthpiece or release the pressure that mouthpiece puts on p-ring by unscrewing it a little
unscrew cap
refill
screw the cap
screw mouthpiece

dont forget that when you screw atomizer screw it as tight as you can

 

[Painfreak]

Pain, the right way is this:

close air control and liquid control
unscrew the mouthpiece or release the pressure that mouthpiece puts on p-ring by unscrewing it a little
unscrew cap
refill
screw the cap
screw mouthpiece

dont forget that when you screw atomizer screw it as tight as you can

Ok i'll take note of that imeo. So if all my liquid go down into the collector tank am i still able to vape as normal or do i need to refill it? Is there any way i can make the liquid go back to the clear window tank? Thanks in advance!

 

[Almighty]

blow tru the 4 holes hard enough, all liquid will go back to tank

 

[Painfreak]

blow tru the 4 holes hard enough, all liquid will go back to tank

doesn't blow through the 4 holes make the liquid come out from the mouth piece?

 

[Caddyman]

Yes it can.

Make sure when you screw the mouthpiece you dont tighten it too much, that is the main reason your atty is getting unscrewed. Just give it a tiny little extra turn when it gets slightly tight.

If the atty gets flooded i close the liquid control, and blow through the mouthpiece, this will push excess juice into the collector below. The way the collector is designed with 4 holes, you can still vape with that juice down there just fine, if you get a bit dry give it a strong pull and it will pull that juice down there into the atty so you can vape it all that way. Then reopen the liquid control slightly and continue to vape.

 

[Painfreak]

Yes it can.

Make sure when you screw the mouthpiece you dont tighten it too much, that is the main reason your atty is getting unscrewed. Just give it a tiny little extra turn when it gets slightly tight.

If the atty gets flooded i close the liquid control, and blow through the mouthpiece, this will push excess juice into the collector below. The way the collector is designed with 4 holes, you can still vape with that juice down there just fine, if you get a bit dry give it a strong pull and it will pull that juice down there into the atty so you can vape it all that way. Then reopen the liquid control slightly and continue to vape.

oh so collector tank juice can still be draw back into the tank by giving it a pull without firing? cool now i got to know more. Thanks alot caddy!

 

[Caddyman]

Yes it wont actually go into the tank really, it just goes up into the atty for vaping.

 

[APM]

don't screw the mouthpiece too tight cause that will also unscrew the atty when you remove the top cap of the UFS

 

[silentt]

If you close juice control and open air you can vape juice in ct

 

[Painfreak]

Ok will give it another shot. thanks guys!!