rebuilding

[Tmg666]

Iv been rebuilding coils for nearly two months now and finally found the perfect vape for now. Dual coil 10 wraps each With the cotton under the coil running at about .9 ohms if my multimeter is accurate.
So has anyone else found there perfect setup and if so share it maybe? Pictures are acceptable if you just want to show off your build to haha

 

[SuperAwesomeDudeguy]

I just built a quad 28g coil on cotton bedding in my patriot yesterday that measured at .2 ohms. Hits like a champ and isnt as bad of a battery hog as I thought it would be

 

[GrandSam]

Good job! Personally, I prefer 5 wraps of flat kanthal (dual coil). I've tried twisted coils, but not impressed.

 

[Tmg666]

Not going to try the different builds besides the micro until I get my sony battery and a better multimeter since can't use ohm tester on my hybrid mod lol old multimeter Might be off alittle lol

 

[ConradM]

Been using a 28g dual coil on my RSST for months... Probably since december. Just decided to switch it up the other day with 26g. .4 ohms.



It's basically a tanked dripper.

 

[RogerWilco357]

pretty impressive . my coils don't look good but work well in the kayfun. 30 gauge wire with ekowool 5-6 wraps at 1.3 ohms works perfectly for me..tons of flavor and vapor..

 

[sawtoothscream]

4 strand braided 32ga and six wraps on a 5/32 drill bit micro style. comes in at .6 and hits like beast. My favorite by far

 

[DreamWithin]

Moved to Coil Builds forum

 

[yellowrider]

Micro Nano 10 wraps of 30awg.. Gets me around 1.4 On my kayfun/russian.

 

[Greg095]

Dual coils, 26awg Kanthal, 7 wraps around a 7/64 drill bit. .4ohms. Cotton wicking

 

[dugga]

4 strand braided 32ga and six wraps on a 5/32 drill bit micro style. comes in at .6 and hits like beast. My favorite by far

Care to share a pick? I've been flirting with the idea of braided coils. Would love to see what you have going on.

 

[supersport13]

Micro Nano 10 wraps of 30awg.. Gets me around 1.4 On my kayfun/russian.

So do you do a cotton cloud under/around it or do you wick thru it?