- Status
That picture is of your actual unit Bella! I've had a few people ask me to make them in the past and i've had to turn them down to time constraints. The first one i made for a customer a few months ago i forgot to the get the specs off of, but i made sure to spec this one before i sent it out, so i can have some more mass produced in the future when i get some time.
Wow...I feel really special now 
I knew it was my actual P16 David and that is so super awesome of you to take such a great pic of it. It is incredibly awesome and I keep looking at it cause it's so darn sexy and mine Thank you so so much for all the hard work you have done and for doing this for me, I really do feel special!
I knew it was my actual P16 David and that is so super awesome of you to take such a great pic of it. It is incredibly awesome and I keep looking at it cause it's so darn sexy and mine Thank you so so much for all the hard work you have done and for doing this for me, I really do feel special!
That's awesome! Your unit made it on the site. I sent you an email David, any clue on what happened to the confirmation?
Last edited:
Is this a sufficient update on your order? :
it's nice.
Din regret to send back for the vent holes and top chamfer.
David, have you received my P16?
Those vent holes are huge, I think the holes take away from the sleek look of those without holes on the website. Holes for air could easily be put on the top of the unit right?
So what did you use a 510-901/901-510 converter together or a T.W. Battery to charger converter to conect it to the battery with. I've been trying to decide which would be best.
I used a 510 to 901 and a 901 to 510 adapter. Just be sure not to over tighten so the 510-901 doesn't sep from the 901-510 adapter. I am awaiting my 510 charger connector, it is on its way on the slow boat from china-LOL
The holes are a safety measure in case a battery violently vents. You wouldn't want them aiming at your face. Mine's vented too, I like how they look really... jet age'ish visual interest.
I am planning on doing the same thing with my infiniti when it arrives: 510-901 to 901-510. How did it affect the air flow of the tank atomizer? I'm using my TW tank system on an ego right now. With the higher voltage p-18, did you notice a big difference/or any difference in vapor, flavor, TH, and how much?
thanks,
It (the doubled adapters)does allow a bit more air to come in through the bottom.
The throat hit is diminished a small amount. The vapor is not as warm.
What I have done to rectify that is to cut the round cap from an Ego mega cartomizer down to fit in the open space and it still leaves enough room for the vent holes on the atomizer to breathe.
You can tell a good difference in the warmth, vapor production and TH using them on the mods. Much more so when you use the cap to close off the extra air flow.
The throat hit is diminished a small amount. The vapor is not as warm.
What I have done to rectify that is to cut the round cap from an Ego mega cartomizer down to fit in the open space and it still leaves enough room for the vent holes on the atomizer to breathe.
You can tell a good difference in the warmth, vapor production and TH using them on the mods. Much more so when you use the cap to close off the extra air flow.
Last edited:
It (the doubled adapters)does allow a bit more air to come in through the bottom.
The throat hit is diminished a small amount. The vapor is not as warm.
What I have done to rectify that is to cut the round cap from an Ego mega cartomizer down to fit in the open space and it still leaves enough room for the vent holes on the atomizer to breathe.
You can tell a good difference in the warmth, vapor production and TH using them on the mods. Much more so when you use the cap to close off the extra air flow.
Cool! Thanks for the post and pics. Nice idea with the cartomizer cap.
Go Gators!
p.s. I am working on a few things to bridge the gap that might look more asthetically pleasing--I'll post if it works out.
Last edited:
Awesome! That is pretty darn exciting right there
How bout this??????? I was able to get the Ego-Tank on the p-18 lol
Click to enlarge
Great Job Grl! That looks pretty cool. I don't have the eGo tank but I wouldn't have thought to do that if I had one lol.
I think the vent holes add to it personally. It's better to be safe than sorry and I'm happy with my decision so that's all that matters. I think the vent holes are a great thing and give it a different look that is interesting in a good way yet still leaving the sleek, classy, sexy look of the whole thing and also giving you protection if anything were to happen with the battery.
Yes, visual interest and safety, spot on.
It (the doubled adapters)does allow a bit more air to come in through the bottom.
The throat hit is diminished a small amount. The vapor is not as warm.
What I have done to rectify that is to cut the round cap from an Ego mega cartomizer down to fit in the open space and it still leaves enough room for the vent holes on the atomizer to breathe.
You can tell a good difference in the warmth, vapor production and TH using them on the mods. Much more so when you use the cap to close off the extra air flow.
Look at you go with your awesome ideas! Great job Grl!
About the vent holes... Though I don't have mine yet to test it, I bet one could cut a few millimeters off the stainless outer tube of a e2 r4 carto and drill small holes into the side of it and use as a space. It would match really well.
You can find adapters that go 510 to 510 now. They are extensions to use the 306 on the ego and might work for this tank on the Precise. I have one of those really short 510 to 901 that might work pretty good also.
Last edited:
I havn't been able to post all day and it's been killing me!!! I GOT MY P16 AND I LOVE IT!!!! I am so excited that it's actually here and I am vaping it like crazy! This thing is so freakin sweet looking! You think the pictures are awesome wait till you have it in your hand, right in front of you, it is truly a piece of art! Thank you SO much David for all the hard work you put into these, it is truly AWESOME! I will get a video up as soon as possible (when the hubby isn't around to make fun of me) and take pictures too
Bella-told you you'll love it,much smaller than you thought,right?It is vaping Jewelry.
glad you finally got it.looking forward to a review.
I inquired about the beveled cap both in my purchase order and in follow up emails. I actually got both the brass and the stainless steel. No response to either inquiry and no bevel delivered. Maybe I wasn't cute enough.
I still love my P18. But, feel slighted after seeing you got your wish granted, while my request was disregarded without a response. I even suggested that I would pay extra if required.
Congratulations Bella. I've been telling you for weeks you'd be delighted. The Precise is a beauty!
Last edited:
- Status
Similar threads
