Recommended VW/WW with Nautilus Aspire and iClear 30s?

[Ketsuban]

Hey So I'm now the proud owner of a nautilus Aspire. My Kanger Aerotank was nothing but issues, and so until I get the replacement parts I need in the mail, I had been using the iClear 30s with my own drip tip and I loooooooved it. But of course, I wanted something more.

I started vaping through my nautilus with mocha menthol 80/20 juice at 24mg nic. I've been kinda playing around a little bit with the voltage and wattage with my MVP 2.0 unit. I'm using the 1.6 ohm head that came with it, and i'm not really sure what to set it at. I want to get a good cloud, of course that's relative to what my MVP and the settings are set to, since I know I'm not going to get clouds like mech mods. Maybe someday, but I'm not quite there yet.

I like a little bit of a throat hit but not too much, and I do like a cooler vape. I have the Nautilus airflow on the second setting but I'm getting used to the third because i'm used to a very eVod like draw, that's not too tight but not too airy.

I've got my voltage at 3.4 and the power level at 6.5 and I'm not getting much out of it. I'm worried I'm going to burn it out though if I set it higher. So I'm wondering, what are your preferred settings? I'm also curious as to other's preferred settings on the iClear 30s. I've got 2 MVP2 units so I can set one with my iClear and one with my Nautilus and just keep it locked.

I've been getting good flavor from my 2.1 ohms iClear30s and it's at V3.8 and W8. So I guess that works for me. XD

 

[Recycled Roadkill]

I've been getting good flavor from my 2.1 ohms iClear30s and it's at V3.8 and W8. So I guess that works for me. XD

Per your last description, if you're in power mode, you're vaping a 8 watts. If you're in the voltage mode, you're vaping at 3.8 volts.

One setting does not affect the other.

 

[pufZeppelin]

Hey So I'm now the proud owner of a Nautilus Aspire. My Kanger Aerotank was nothing but issues, and so until I get the replacement parts I need in the mail,
I had been using the iClear 30s with my own drip tip and I loooooooved it. But of course, I wanted something more.

I started vaping through my nautilus with mocha menthol 80/20 juice at 24mg nic. I've been kinda playing around a little bit with the voltage and wattage with my MVP 2.0 unit.
I'm using the 1.6 ohm head that came with it, and i'm not really sure what to set it at.
I want to get a good cloud, of course that's relative to what my MVP and the settings are set to, since I know I'm not going to get clouds like mech mods.
Maybe someday, but I'm not quite there yet.

I like a little bit of a throat hit but not too much, and I do like a cooler vape.
I have the Nautilus airflow on the second setting but I'm getting used to the third because i'm used to a very eVod like draw, that's not too tight but not too airy.

I've got my voltage at 3.4 and the power level at 6.5 and I'm not getting much out of it.
I'm worried I'm going to burn it out though if I set it higher. So I'm wondering, what are your preferred settings?
I'm also curious as to other's preferred settings on the iClear 30s. I've got 2 MVP2 units so I can set one with my iClear and one with my Nautilus and just keep it locked.

I've been getting good flavor from my 2.1 ohms iClear30s and it's at V3.8 and W8. So I guess that works for me. XD

a rule of thumb, coil Ω + 2.0 = volts setting

so your 1.6Ω coil + 2.0 = 3.6v (est) (equiv to 8.1w)

you either set VOLTS OR WATTS, never both
being new at it (and volts move in .1 vs watts in .5) I would just use volts settings for time being
till you get a feel for it
and work your way up the scale until you get a vape YOU like... (3.6, 3.9, 4.0, 4.2v etc)

ever use one of these ? - Ohm's Law Calculator

and remember, air flow isn't as much for your pleasure, it dictates how much fluid pulls into your wicks...

good luck

 

[Ketsuban]

delete this post please

 

[Recycled Roadkill]

Ketsuban,

B&M owners I knew (out of business now) were telling their customers that setting watts was the first step and setting volts would "fine tune" their wattage setting.

B&M owners should absolutely know the features of the products they're selling.