I cant keep em coming because I hacve 3 already.... any way they are not going to look likr as good the one on your avatar
Red Sky - Contest time! Desk Caddy design
- Thread starter Capt' Brian
- Start date
- th_trl_thread_readers 0
- Status
Next one will be better I hope just want to get this on the board. not how I first saw it.
Time to evolve....
I will note the Mainmast hole is for a larger mod (Provari)
fore mast a Ego type and
Captain's Cabin a RSmod
and carto/atty, cannons
(seriously not to scale)
Last edited:
No 1
I was thinking about this and I don't know if you can do little drawers but if you can you could move the RSM up and add a little catch all drawer below it??
OK this is a free 3-D software I downloaded and used for anyone that wants to use it
Google SketchUp
(though I am now opening myself up to lose
View attachment 58206 Excuse "Me" - Ms. "Laura" with the quality of your work alone and your unlimited willingness to share - not only what you know and providing information
, but to assist others in their quest to do and learn more . . . View attachment 58211HOW COULD "YOU" of ALL PEOPLE BE ANYTHING - BUT A "WINNER" . . . View attachment 58208
AND - "YOU" always will be - at least - to "Me" View attachment 58207
View attachment 58210
knowing blender helps but this is was easier then blender, I love it.Cool program isn't it
love you drawer idea and your catty.
I love the swivel too <3
Last edited:
POOH I built my boat too slow I'm not stealing betty's or reddhot's idea I swear....
I'm not stealing betty's or reddhot's idea I swear....
I think it's safe to say that a pirate ship would come to mind pretty readily when asked to design a caddy for RedSkyMods.
Uploaded with ImageShack.us the top would slide back or to the side which ever you would like Red sky mods could be engrave on the front and your own initials on the top. colored wood could be and idea also.#3
I actually thought of doing something based on a "Pirate Theme" last night after I saw what you did Ms. Laura . . . Guess, I really should have posted something then, especially seeing all of these submissions now . . .
I even Googled some images of pirate ships and dowloaded them to use as a guide . . .
View attachment 58212View attachment 58213View attachment 58214
Matter of fact, given my limited abilities to draw and post something here on the thread, I wrote something to explain what I was thinking of doing or having someone help me post:
Staying on a theme and Based on a Pirate Ship:
The base would be a 3 tiered ship were it could be used for both a Red Sky Mod and either eGo and/or KR808D equipment both - Where the eGo batteries would be placed as cannons/oars w/Atty & Cones around the base and surrounding them (like cannon balls); the “holes” of the "ship" would hold different sizes of “Nic-juice” (and be able to be covered for "saftey" and to keep out of the light) and the Mast would be the KR808 w/the cartomizers around the "mast" on little rings (just like on a ship where the ropes are tied too) – and then finally, of course - the Captin’s deck would be for a RSM and hold all the equipment and supplies needed there.
SO that's was my idea last night, if anyone wants to take it to the next step it is all theirs - so please feel free to expand/ellaborate or do what ever you want with it - even discard or ignore . . .
And at this point - I think, given the quality and the other submissions already submitted - I am going to bow out as gracefully as I possibly can - NOW . . .
Good Luck ! ! ! Everyone . . .
I am absolutely sure "Judge Pchela" will pick the most derserving concept and design
OH BTW: as a P.S. Another thing I was thinking of, is if this "caddy" could be similar to some of the other types of caddy's out there for Cell phones, iPhones/iPods, Smartphones, etc. . . . If there was someway to manage this or adapt to one of the designs, it might be really nice to have a "Battery Charger" that you could plug in or have a bigger rechargable battery somewhere in the caddy - so that the eGo and/or KR808 batteries while sitting in the caddy could also be charging too - I think that would be great ! ! !
View attachment 58215
Capt' Brian - THANKS ! ! ! For another Wonderful Contest and a possible chance to "win" one of YOUR GREAT CREATIONS ! ! !
Possibly see you next time - when there is another contest
I even Googled some images of pirate ships and dowloaded them to use as a guide . . .
View attachment 58212View attachment 58213View attachment 58214
Matter of fact, given my limited abilities to draw and post something here on the thread, I wrote something to explain what I was thinking of doing or having someone help me post:
Staying on a theme and Based on a Pirate Ship:
The base would be a 3 tiered ship were it could be used for both a Red Sky Mod and either eGo and/or KR808D equipment both - Where the eGo batteries would be placed as cannons/oars w/Atty & Cones around the base and surrounding them (like cannon balls); the “holes” of the "ship" would hold different sizes of “Nic-juice” (and be able to be covered for "saftey" and to keep out of the light) and the Mast would be the KR808 w/the cartomizers around the "mast" on little rings (just like on a ship where the ropes are tied too) – and then finally, of course - the Captin’s deck would be for a RSM and hold all the equipment and supplies needed there.
SO that's was my idea last night, if anyone wants to take it to the next step it is all theirs - so please feel free to expand/ellaborate or do what ever you want with it - even discard or ignore . . .
And at this point - I think, given the quality and the other submissions already submitted - I am going to bow out as gracefully as I possibly can - NOW . . .
Good Luck ! ! ! Everyone . . .
I am absolutely sure "Judge Pchela" will pick the most derserving concept and design
OH BTW: as a P.S. Another thing I was thinking of, is if this "caddy" could be similar to some of the other types of caddy's out there for Cell phones, iPhones/iPods, Smartphones, etc. . . . If there was someway to manage this or adapt to one of the designs, it might be really nice to have a "Battery Charger" that you could plug in or have a bigger rechargable battery somewhere in the caddy - so that the eGo and/or KR808 batteries while sitting in the caddy could also be charging too - I think that would be great ! ! !
View attachment 58215
Capt' Brian - THANKS ! ! ! For another Wonderful Contest and a possible chance to "win" one of YOUR GREAT CREATIONS ! ! !
Possibly see you next time - when there is another contest
just wanted to say ty for the chance to get to throw out some designs! lot of nice ones!!!
i would love something like this.
little spots for attys in the small tray arias then bottles and batts a extra mod in the center.. becuse my rsm would be in my hand
i would love to see it function like this though...
Target:Bamboo Turntable - 10"
so it can spin to my favoret juice with ease..
thanks for the chance captain
little spots for attys in the small tray arias then bottles and batts a extra mod in the center.. becuse my rsm would be in my hand
i would love to see it function like this though...
Target:Bamboo Turntable - 10"
so it can spin to my favoret juice with ease..
thanks for the chance captain
I'm crazy busy at work this week, so I won't have an entry until sometime Saturday, but I am planning on getting in at least one before the deadline.
i would love something like this.
little spots for attys in the small tray arias then bottles and batts a extra mod in the center.. becuse my rsm would be in my hand
i would love to see it function like this though...
Target:Bamboo Turntable - 10"
so it can spin to my favoret juice with ease..
thanks for the chance captain
Interesting idea. Fifteen bucks for a round piece of wood? Hmm, maybe my prices ARE too low,
Okay, here goes...
#1 8" x 5"
The two rectangels in the back are for wood mods. The hole in between them is for a tube mod or a 15ml bottle.
The holes in the center are for 10ml bottles or tanks. The space in the middle is for the engraving
The little holes are all atty/carto holes. The rectangle in the front is a tray for whatever.
#1 8" x 5"
The two rectangels in the back are for wood mods. The hole in between them is for a tube mod or a 15ml bottle.
The holes in the center are for 10ml bottles or tanks. The space in the middle is for the engraving
The little holes are all atty/carto holes. The rectangle in the front is a tray for whatever.
When I woke up and saw my drawing in the light of day, it looked more like a couple of socket wrenches and a head gasket.... 
LMAO!!!
You guys and gals (or should I say scallywags and wenches???) are coming up with some really great designs...
LMAO!!!You guys and gals (or should I say scallywags and wenches???) are coming up with some really great designs...
Keep up the good work, and Good Luck to all of you!!! 
Arrrrrr!!!!
Arrrrrr!!!!
- Status
Similar threads
- Locked
