refilling method - please look at this video n comment

Status
Not open for further replies.

yellow

Senior Member
ECF Veteran
Feb 17, 2011
269
49
nyc
YouTube - How-to guide to refilling KR808D-1 or Vapor King cartomizers

This video is a different way than the condom method that i mostly see and its from the back/mouth side instead of the cartomizer hole side.

is this a good way to do it? seems easy and less of a problem for leaking into the hole.

hes also usin vapor4life stuff, so i was wondering where that little plastic piece he pulls out after the rubber end comes from...i dont have those, i open the back and all thats there is the white mouthpiece (and inside of course the filler and wick)
 

SnowDragon

Moved On
ECF Veteran
Jul 28, 2010
3,755
1,874
Boise, Idaho
That's an old video using old cartomizer which is no longer in production.

http://www.youtube.com/watch?v=hKmz7ZVRceI (this is visual demo only)

I used to use the condom method but I found there was just too much to wipe down afterwards. There are other methods such as using a syringe, or taking a condom with a .... plug, filling, then doing a taryn spin.

As long as the polyfill is absorbent (not wound too tight) simply dripping on the inside of the cartomizer housing while holding the carto at angle will work just fine.
 
Last edited:

SnowDragon

Moved On
ECF Veteran
Jul 28, 2010
3,755
1,874
Boise, Idaho
+1 Frick....extremely cool avatar btw.

On occasion I'll get a pack of Cartos (Just had a pack of blue wire Cool Cartos) where the polyfill was wound way to tight to absorb any juice. When that happens I will take a condom with a .... plug, stick it on the battery end, drip, then taryn spin it, repeating it until it's full. Not the condom method per se, but the only time I use one when filling. Since I stopped using the condom method 6 months ago my batteries stay clean and best of all I never waste a single drop of juice.

The Youtube video link in post #2 is actually me filling a carto.
 
Status
Not open for further replies.

Users who are viewing this thread