Remove the top cup, how ?

[mc0676]

He guys, i use about 7-8 ml of eliquid at day and sometime i would clean my provari.
So ... how i can remove the top cup ?
Is this possible ?

 

[ScottinSoCal]

I just unscrewed the bottom cap of mine and took a look inside. It appears to me that the only way to do it would be to disassemble the whole thing - and that would definitely void your warranty. I would suggest just sticking with the ProVape recommended cleaning method: a Q-tip for the top, and a brief blast of canned air for the inside.

 

[mc0676]

Can one help me ?
I've a lathe and i want do an alluminium tube for my provari to reduce the weigh but i need to know how remove the top cup.

 

[invidregis]

I believe that the top cup is connected to the circuit board. The 2 star drive screws next to the display look as if they hold the whole assembly in place.

 

[pack21]

I would also like to know, how to take the top cup.

 

[MonsterKenny]

Removing the top atomizer cup is NOT recommended. It is press fitted. But there is a way to remove it, only if you want to risk damaging your ProVari.

 

[mc0676]

He @monsterKenny,
i'm using my provari from 4 months and i'm so happy of this that i'm going to shop another provari.
The only problem that i've is the weight.
So at MY RISK i want try to put the internal circuit of my provari in one my lathe creation, for example this:
http://img40.imageshack.us/img40/2915/dsc6159.jpg

in this i can reduce the global weight about of 60-70 gr.

So can u help us ?

Thank you.

 

[pack21]

He @monsterKenny,
i'm using my provari from 4 months and i'm so happy of this that i'm going to shop another provari.
The only problem that i've is the weight.
So at MY RISK i want try to put the internal circuit of my provari in one my lathe creation, for example this:
http://img40.imageshack.us/img40/2915/dsc6159.jpg

in this i can reduce the global weight about of 60-70 gr.

So can u help us ?

Thank you.

+1, Me too, I know is my risk.....help us @MonsterKenny.

 

[executivul]

It's press fitted. The russians at ecigtalk.ru just hit it gently with a hammer and a very long screwdriver from the inside.
As monsterkenny said, being careful saves your PCB. Another approach would be to insert a sharp knife between the body of the Provari and the top cup, but you risk damaging the edge.
I hope I won't need to do this ever, unless the button fails on me.