Reo grand LP subohm question

[Vapefiend]

Hey everyone, just got a Reo grand LP and will be trying out my Geekvape tsunami 24 plus on it. What's the lowest dual coil build I should use while also remaining in the safe zone on the Reo. I am using lg hg2 batteries they are IMR 3000mah 20amp.

Thanks for your input!

 

[DoubleDZA]

I'm not sure on the specs of the hot spring in the Reos but I'm almost certain it will handle 20amps very easily. Thats not to say you should be building that low on that battery, here's some info on that battery:
"Because of these test results I am changing the continuous discharge rating (CDR) of the LG HG2 from 20A to 18A." -- Who has the best 3000mAh battery? -- LG HG2 vs Samsung 30Q vs Sony VTC6 Shootout


Your question "how low can it go?" is kinda weird to me, if I may ask, what is your current go-to coil builds on mech mods? And if new to mechs, what wattages do you vape at, using what resistance coils?

 

[Vapefiend]

First mech mod usually do .3-.4 coils around 40-50 watts

 

[BreSha6869]

I am running the exact same setup. Tsunami 24 on my REO Grand LP.

I am using 25A Samsung and LG batteries at 0.5ohms and 30A LG batteries at 0.3ohms. If I was using LG HG2's, I would likely try to stay closer to 0.5ohms.

 

[Vapefiend]

No doubt thanks for the input. Btw awesome choice!

 

[Baditude]

I have my Reomizer RDA set up with dual coils at 0.6 ohm total for my Reo. I use either a Sony VTC4 or an AW 3000mah 20A battery in my Reo.

I'm not sure what the melting point for the hot spring in the Reo is. Might want to give Rob a call on that.

 

[Vapefiend]

Thanks I'll try .5 and see how it vapes. If needed I'll ask Rob.

 

[dhaiken]

I'm running dual 24ga @ .32 in a Charm and it works fine w/a VTC4.

 

[muzichead]

The spring on the REO can handle a .2Ω coil all day long with no problems. I have heard mention of a few running .15Ω, but it is not recommended as there are only a couple batteries out there that can handle that...

If you ever have any REO related questions they get answered pretty quickly in this thread... REO Technical Issues/Shop Talk

 

[Vapefiend]

Thanks muzic

 

[Vapefiend]

Guys I've got it down. Had to change my build but omg best vape ever.

26gauge kanthal 6 wraps on a 1/8 drill bit .49ohm the vapor and flavor is phenomenal.

 

[DoubleDZA]

Guys I've got it down. Had to change my build but omg best vape ever.

26gauge kanthal 6 wraps on a 1/8 drill bit .49ohm the vapor and flavor is phenomenal.

lolz thats exactly my builds in the O16

 

[Vapefiend]

Wish I thought of it before haha