Reo grand won't fire I'm a newbie

[Roscoe01]

The build on the rda
Does the battery have to be a button top

Looks like the coil on the bottom of the pic could be hitting the top cap. May just be the angle of pic but looks reallllyyy close to the edge.

 

[tmel]

I would ABSOLUTELY remove one of the coils and re-position the other closer to the posts. The coils diameter and fancy nature make them a tad large for what you're doing i think.

Removing one coil makes the vape safe as well

 

[Kiznar]

Pictures of everything

 

[Mrs C]

You said someone built that atty for you... Whoever it was had no business making that build for that battery.
That is why you do not blindly trust others to build. If you can't do the build yourself, you need to know enough about battery safety to know your limits and make sure your build is within them.

 

[Kiznar]

Sold me the battery too. . Would it work on a 18650 1600mha? Does the battery need to be button top?

 

[Roscoe01]

Looks like 510 gasket on reo might be mashed a bit. One of the veterans should be able to give u advice on what to do.

Caution. ..do not try to adjust the reo 510 center pin.

 

[Raynman]

It would work if it's an AW battery 24 amp.

 

[supertrunker]

If it won't fire, atty centre pin is not meeting Reo 510 pin.

Coils looks fine, battery is well able to do the job. Try unscrewing the bottom pin of the atty anti-clockwise, to make contact with the Reo.

T

 

[Kiznar]

If it won't fire, atty centre pin is not meeting Reo 510 pin.

Coils looks fine, battery is well able to do the job. Try unscrewing the bottom pin of the atty anti-clockwise, to make contact with the Reo.

T

Fixed it unscrewed the atty

Thanks so much reading up on battery's and ohm laws got a long road ahead it wound seem Thank you all for responses I will read and learn ohm laws and battery safty. I won't shrug off advice Givin. Thank you for your time again.

 

[Roscoe01]

Sold me the battery too. . Would it work on a 18650 1600mha? Does the battery need to be button top?

Your green Sony battery will work in there. It's what i use in mine.

We will help u get sorted. Good folks around here. Before u know it you will be wrapping coils like Super x and helping other new folks

 

[Mrs C]

Kiznar an AW1600 is 24A the 2200 is 20A either would be good for that build. Alternately to use your 2000 battery you need to bring your build to .5 or higher. Please be careful with what you have there atm.

 

[Mrs C]

Oh and Welcome to Reoville Kiznar .

 

[supertrunker]

hehehe!




T

 

[Justice]

Kiznar take the button topper off the switch someone really should have asked this already the button tops can push down and stop contact just try it see what happens