Replacement coil confusion

[Darth Xibalba]

Hello, I'm new to vaping (2wks),and I'm a little confused about the coils. I'm using an IPV D2 which can do power mode(watts) or joules mode (temp control). I really just want to do the power mode, but I don't know if u can use any ohm or if there are some for one or the other.
I started with a HorizonTech Cerakoat using the .3 Clapton and .3 mask coils in power mode. Worked fine except it leaked badly out of the air vents. So I got a Joyetech Cubis and have been using the .5 coils. LOVE THIS TANK, but I got a few others to try out. One was the Eleaf GS. Really only grabbed this one cuz it was super cheap, however I can only get it to work in temp control. It's using a NI .15 coil. Seems this tank is meant for a mouth to lung vape which isn't the way I like to vape. I also have the Tobeco Super Tank KS,which I got from the vendor that I got the Cerakoat from after telling him about all the leakage. This thing is a monster 10ml tank! I haven't even tried it out because it doesn't come with instructions, and the reviews I've read said it's a leaker too. Also it looks like you have to use tools to loosen screws and set screws to take it apart. Definitely not for a novice, I guess I'll save that one for a later day.
So anyway I'm gonna keep vaping the Cubis, but was just wondering if there are coils I can put I the GS tank so that I can use it in power mode?

 

[djsvapour]

Someone called? (GS tank?)

The Nickel coils don't work. It's a half page explanation.

You can buy other resistance "Pure Cotton" coils for the GS tank (GS Air) that work in power mode.

It's really a MTL tank, but on four holes and a bit of slipstream (carb' ing) you can get a touch of direct, but it's not the greatest.

I buy the 1.2ohm, there must be others.

 

[gandymarsh]

You can use any of the coils made for the GS-Air line of clearomizers. I generally use the 1.5 ohm coils. Eleaf Coils - Eleaf - Tanks & Coils

 

[djsvapour]

You can use any of the coils made for the GS-Air line of clearomizers. I generally use the 1.5 ohm coils. Eleaf Coils - Eleaf - Tanks & Coils

What sort of power (watts) do you feel they can do?

 

[gandymarsh]

I run my GS-Tank @ around 17 watts. I think they will be OK up to 20 watts depending on your device and the juice you use.

 

[Darth Xibalba]

Someone called? (GS tank?)

The Nickel coils don't work. It's a half page explanation.

You can buy other resistance "Pure Cotton" coils for the GS tank (GS Air) that work in power mode.

It's really a MTL tank, but on four holes and a bit of slipstream (carb' ing) you can get a touch of direct, but it's not the greatest.

I buy the 1.2ohm, there must be others.

Cool thanks for the info. I'll get some of the 1.2ohm coils and try em out on the GS.
Any advise for the leaky Cerakoat? I've checked all the O rings and replaced them, unless there was one I missed.
Any words of wisdom on the Super Tank KS? That thing is intimidating!

 

[gandymarsh]

Can't help there. I don't own either. You could try to search the forum. Upper right side of the page.

 

[djsvapour]

I run my GS-Tank @ around 17 watts. I think they will be OK up to 20 watts depending on your device and the juice you use.

That's a good result. I have problems from about 16 upwards with the 1.2ohm.
Nice info

(and thanks!)

 

[BrotherBob]

Welcome and glad you joined.
Might like to read:
Beginner | Guide To Vaping
ECigarette Academy: Essential Need to Know for New Vapers
One Stop Reference Shop For New and Experienced Vapers
Learn About Vaping Here - Everything Ecigs - From Beginner To Advanced
Ch. 4 E Cig Battery Basics: Cig-a-Likes, Egos, and Mods - onVaping
(10) Advancing Up the Vaping Ladder with Egos and Mods | E-Cigarette Forum
(4) Good Starter Setups for a Beginning Vapor | E-Cigarette Forum