Replacement O-Rings?

[John_]

I'm a little paranoid that the o-rings that hold on a few of my atomizer caps are going to wear out and break. I was wondering if anybody has complied a list with RBAs and their matching o-rings or knows what size I need for replacements? The ones I'm concerned about at the moment are;

Loki Lab/Vapor Bombz Omega rda
MCV Atomic rda
VHO Helios rda

 

[Redlig]

Harbor freight o ring kit love em get some you probably won't use but it's harbor freight stuff very cheap

 

[John_]

Harbor freight o ring kit love em get some you probably won't use but it's harbor freight stuff very cheap

Don't know why I hadn't looked at them before, thanks. The o-ring I'm using on the atomic right now is from an o-ring kit i found on amazon but it doesn't quite fit right.

 

[Moodyfisherman]

Don't they have to be food grade o-rings??...just saying

 

[John_]

Don't they have to be food grade o-rings??...just saying

It's a piece of black rubber, what's the difference?

 

[Portertown]

If you know the size you need this is a supplier for orings.

O-Ring Warehouse | O-rings Online | Nitrile (Buna), EPDM, Silicone, Fluorocarbon

 

[John_]

If you know the size you need this is a supplier for orings.

O-Ring Warehouse | O-rings Online | Nitrile (Buna), EPDM, Silicone, Fluorocarbon

Thanks for the link but...

I'm a little paranoid that the o-rings that hold on a few of my atomizer caps are going to wear out and break. I was wondering if anybody has complied a list with RBAs and their matching o-rings or knows what size I need for replacements? The ones I'm concerned about at the moment are;

Loki Lab/Vapor Bombz Omega RDA
MCV Atomic RDA
VHO Helios RDA

 

[SoCalCraig]

I'm a little paranoid that the o-rings that hold on a few of my atomizer caps are going to wear out and break. I was wondering if anybody has complied a list with RBAs and their matching o-rings or knows what size I need for replacements? The ones I'm concerned about at the moment are;

Loki Lab/Vapor Bombz Omega RDA

13x1.5mm

 

[John_]

13x1.5mm

You sir, are amazing. Thank you. The Omega has become my favorite and a broken o-ring will not stop me from using it!

 

[rook2pawn]

You sir, are amazing. Thank you. The Omega has become my favorite and a broken o-ring will not stop me from using it!

Hey do you know what AS568 size O-ring the 13x1.5mm is? I can't find it on the chart

http://www.oringwarehouse.com/files/documents/oring-sizechart.pdf

There's a AS568-014 and AS568-15 which are 12mm x 1.78mm and 14mm x 1.78mm but not quite 13x1.5mm ...

 

[SoCalCraig]

Hey do you know what AS568 size O-ring the 13x1.5mm is? I can't find it on the chart

http://www.oringwarehouse.com/files/documents/oring-sizechart.pdf

There's a AS568-014 and AS568-15 which are 12mm x 1.78mm and 14mm x 1.78mm but not quite 13x1.5mm ...

On the package label from my vendor it's "S13 13x1.5mm" I know when we made our tanks it wasnt a size they stocked in large quantities. However they do now.

We use that size on a few products not just the Omega.

Hope that info helps!



Sent from my SCH-I605 using Tapatalk

 

[duroSIG556R]

Does anyone know what size the Tugboat rda uses?

 

[ClintS]

+1 good question

 

[Randy C]

I've been using O-rings rated "Buna-N" for vaping hardware. From what I understand, these are widely used in automotive applications and won't breakdown like cheaper rubber o-rings

 

[ClintS]

Does anyone know what size the Tugboat rda uses?

I put on a 17mm x 1.5mm and it seems to be working great. It does not take much size difference for it not to work though. I'd suggest you local vape shop to find one.

 

[Armageddon]

Does anybody know in which material the o-rings are made (Silicon, Nitrile.....?) because before choosing a size, I need to select a material.....

Thanks

 

[rsimpson]

I'm a big fan of Harbor Freight but I've had issues with their rings on my attys, mainly inconsistent fit, breakage, etc. Maybe I'm just a little hard on them too considering i've used them for non-vaping applications with no issues.

I haven't tried o-ring warehouse but it seems like they are closed for business.

One place to mention is fasttech, they have packages of silicone o-rings for RDAs for under 2 bucks for 50 o-rings. I haven't used them but I know folks that have and they've had good results.

 

[Scy123]

you can check here for oring material melting points O-Ring Material Guide

Silicone seems best. It's cheap, has a high melting point and is non toxic.

 

[tipdripper]

Does anyone know about spare orings for the plumeveil that still have a good not too tight fit?

 

[JRIP]

You should use Viton compound o-rings instead of Buna-N. Viton has nearly double the heat rating as Buna-N.