Resin mods

[nerak]

Here is Robert's post from this thread, click on his quote to go to the post:

The resin or urethane mods will all be LP and have mechanical switches . They are exactly like the new woodvil in every way - the wood .
I dont see me ever putting a store bought switch in a mod again

 

[unsure]

I'm speaking in terms of rapid temperature change and high humidity. It's ridiculous where I'm at, I'd be concerned with the expanding and contracting of the wood. Plus I'm sure if I were to get a woodie it would eventually be dropped and I wouldn't want to worry about cracking or chipping wood. I spill juice from getting to over zealous and sqounking to hard, the next thing I know juice is pouring out the air holes and I have to wipe it up.

You are right about the maintenance with the grands, but I can completely handle that. I'll pop the bottle and battery out, remove the atty and give the grand a quick warm bath. Fire up the air compressor and blow dry it off and reassemble. That all literally takes about 10 mins of my time. Then I'll apply some noalox, build some coils and I'm back in business for another two weeks or so.

I think I'll just feel more at suit with a resin, and I really wouldn't have to worry about half the other things I mentioned above. If I drop it, I'll buff out the damage, if I spill juice doesn't matter, I'll just wipe it up. Certainly wouldn't have to apply wax or wood conditioner to the wood to keep it protected. The resins are just more appealing to me at the moment. It's funny too cause I was so set on trying to score a woodvil, then Rob drops the bomb on new resins. I could get a color I really want (flat black w/slimer green door) it looks like a woodvil, but performs like a grand. Did Rob ever say if they were gonna be top fires like grands or side fires like woods?


Sent from my iPhone using Tapatalk

I understand. Maybe in the future Rob will kick it up another level and offer both wood and resin all in one. as Rob cringes and shakes his head.

 

[redeyedancer]

I understand. Maybe in the future Rob will kick it up another level and offer both wood and resin all in one. as Rob cringes and shakes his head.

Rob has already done that that will cost ya

 

[redeyedancer]

I have said it before I wont begin making these until the wood run is done . I still have some testing to do on these mods

 

[Filthy-Beast]

SLACKER


J/K , I couldn't resist

 

[redeyedancer]

SLACKER


J/K , I couldn't resist

I will get you for that one

 

[unsure]

I will get you for that one

that takes the heat off of me.

 

[Filthy-Beast]

I will get you for that one

I'll just hide in the corner for a while.

 

[Mrs C]

I have said it before I wont begin making these until the wood run is done . I still have some testing to do on these mods

Perfection can't be rushed.
Good things come to those who wait patiently

 

[Cob24]

I have said it before I wont begin making these until the wood run is done . I still have some testing to do on these mods

That's great. That way everyone burns up duckets during the wood run and makes it easier for me to snag a resin


The future is bleak...

 

[TheBikeGuy]

I have said it before I wont begin making these until the wood run is done . I still have some testing to do on these mods

I think you mentioned something about the firing button and profile too didn't you?

 

[house mouse]

Will you be able to clean them the same way as the grands? Or are these wipe clean only?

 

[Doffy]

Will you be able to clean them the same way as the grands? Or are these wipe clean only?

not sure, but rob said the resin is ok with liquid. i think it was ian444 that said they should, depending on the wires. but i didn't see rob reply if he did

 

[house mouse]

not sure, but rob said the resin is ok with liquid. i think it was ian444 that said they should, depending on the wires. but i didn't see rob reply if he did

Yeah, I was wondering about it because of the wires. I've been using REOs for 3 years and can still be an energetic squonker at times.

 

[redeyedancer]

Will you be able to clean them the same way as the grands? Or are these wipe clean only?

I would wash mine in the sink

 

[Filthy-Beast]

I will be also putting Deoxit on the ends of the wires and solder points.

 

[house mouse]

I would wash mine in the sink

Guess I'm going to have to start hanging around a bit more to keep an eye out for them then.

 

[unsure]

Rob has already done that that will cost ya

Should you ever get any that resembles these then hold them back for me.

http://www.angelfire.com/folk/memorial/weirdwood1__1_.jpg
http://www.angelfire.com/folk/memorial/weirdwood1__2_.jpg

 

[JetMac]

That's sick man.


Sent from my iPhone using Tapatalk

 

[RGLP4Lyfe]

Should you ever get any that resembles these then hold them back for me.

http://www.angelfire.com/folk/memorial/weirdwood1__1_.jpg
http://www.angelfire.com/folk/memorial/weirdwood1__2_.jpg

Those are RIDICULOUSLY AWESOME. I'm jealous to whomever owns those. I'd pay some bucks for those. Geeesh.

-Mark