Resurrectors in Tank..any advice?
- Thread starter Dying2Live
- Start date
- th_trl_thread_readers 0
-
- Tags
- myvaporstore nicquid provari
- Status
anyone? can't seem to keep the resurrector from leaking out of the battery end hole when in the tank, am I cutting too big of a slit? using a dremmel
Try running a safety pin or needle between the tank and o ring. This will allow the air pressure to equalize. After filling a tank there is higher pressure in the tank than outside causeing it to leak till its the same
I use resurrectors in my tank without any problems unless there is an air leak somewhere. Buy the stainless steel ones.. all I've got are the black ones and getting the sticker off of them is not fun.
How's it working now? These are quite simple.. there can only be 3 problems
1.. having too much air in the tank when filling.. result.. flooding
2..grommets are nicked somewhere, allowing air into the tank, upsetting the equalization of pressure.. result.. flooding
3..carto is punched too deep allowing juice to leak into the inner tube.. result.. flooding
and I guess there is a chance that the bottom seal can be broken and juice will leak out of the tank itself.
actually got it working thanks donnah! my first attempt i cut the slit wayyyyyyy to big it was just flooding too quick into the carto i believe. so i took a smaller grinding wheel for my dremel. cut a tiny tiny slit just enough for juice to flow in. than i got some help thanks to youtube on how to put juice in and close the tank correcty to equalize pressure. its been vaping perfect for the past hour. every drag i take i see a small air bubble coming up from the slit so i know its flowing into the polyfill just right(atleast i hope so).
got another quick question, when the carto is in the tank is the top polyfill still supposed to be all wet and slushy like or just down in the middle of the carto? the top of my carto looks a bit dry but its hitting nice
I use DC cartos and occaisionally see that the top looks dry. I drip about 5-10 drops to keep it moist on top. The DCs have a coil a little higher ,so I top it off sometimes just to prevent the higher coil from burning the filler.
It only takes a tiny hole to wick the nicquid. Glad you found the error in the way the first one failed. $2 lesson lol!
It only takes a tiny hole to wick the nicquid. Glad you found the error in the way the first one failed. $2 lesson lol!
from what I understand, the top of the carto isn't supposed to look or be wet. maybe a bit moist but not slushy.
From my experience so far, the resurrectors will stay dry on the tops but that is not a problem because they are single coil. I notice that compared to some other cartos, the resurrectors poly is not as dense or not wound as tight so a smaller hole when using in tanks is suggested. That is my experience anyways.
thanks everyone for the help. also my resurrectors seem to get dirty very quick. just after a day of vaping on one, my light orange juice dripped out of the battery end and it was a dark brown color...is this normal?
Tried the black sticker removal myself. i was able to get it off just not the residue. Will buy stainless steel only now, LOL --or clear depending upon how I'm gonna use the carto.
You can get the sticker residue off with 90% isopropyl alcohol but it takes a bit of scrubbing.
Acetone should work better, if you happen to have some on hand.
Acetone should work better, if you happen to have some on hand.
...acetone=fingernail polish remover..............................
thanks! it worked great! (and took the nail polish off my fingernails at the same time!)
I received my proVari in the mail yesterday. and I know these resurrectors are built for 3.7 devices but these things ROAR at 4.0-4.1!
My vv device is broken at the moment
I should have another one here tomorrow (please please please) so for now I've got to use mine on a 3.7 box. Experimenting with the 2.0 boges (in a tank)but they're just not that great at 3.7. When I had my vv device, I loved using the resurrectors at 4 volts.
for 3.7 devices I like the DC1.5's better. But a Precise 18650 Mod on a full charge is really almost 4.2. I had tons of problems getting Ressurectors to work in a tank. To the point I gave up on them. Perhaps this air thing is the answer. The ones that the hole was too big in I just cut a carto condom and slid it over the hole and used them!
- Status
Similar threads
