Reuleaux RX200S TC Problem

[Eskie]

To get 0.3 to 0.4 ohms that would need 10 to 14 wraps I'm not sure i would be able to fit a spaced coils that size in the Bellus

OK. You're using 317L. What Gauge? A coil 3 mm ID with 28G 317L at 0.5 ohm would require all of 4 wraps. 26G 6 wraps. 24G 11 wraps. If you're using 24G wire, get something small (higher gauge, confusing, I know). Coil wrapping

 

[humax]

Hi

Its 26 g and i wrapped @ 2 mm ID

 

[Eskie]

Hi

Its 26 g and i wrapped @ 2 mm ID

Use a 3 mm ID. It fits fine in a Bellus. 6 wraps you should be good around 0.5 ohm

 

[humax]

Use a 3 mm ID. It fits fine in a Bellus. 6 wraps you should be good around 0.5 ohm

WOW you can get a 3mm coil in a Bellus I take my hat off to you sir

.

 

[Eskie]

WOW you can get a 3mm coil in a Bellus I take my hat off to you sir

.

I have in a single coil setup. Never tried a dual build ever on that tank.