The NoName - Italian Big Battery
hello guys, I first of all apologize for my English but I am Italian and write to here from you I have to use a translator.
I opened this topic, because I got the NoName and I wanted to review it:
The NoName is a BigBattery thought, designed and manufactured in Italy by the modder "Peppo99 and B-effe". mod is a semi-mechanical because, unlike the other BB has a key with electronic circuit, different from that of the batteries Ego which stabilize the voltage at 3.2/3.4v this has the only function to activate or not the BB, and then the operation discharge and disbursement of volts is identical to that of a mechanical BigBattery.
In conformation base, the BB is composed of top cap tube with electronic switch, central tube, inner sleave, and tube logo for 18350 batteries, all in stainless steel 316. separately, you can buy 2 kits, the kit consists of batteries 18490 sleave internal tube with logo, also in 316 stainless steel, and brass kit, consisting of 2 internal sleave, one by one for 18350 and 18490 and a button.
Basic kit:
Upgrade 18490:
Upgrade Brass:
Top Cap:
To the cap has a connector 510, with double pin adjustable brass, has a pin consists of two parts, a pin that serves to adjust the proper contact with the pin of the electronic switch, while the external pin is used to adjust the contact with the atom.
The top cap in turn is composed of two parts, removable via 3 allen screws on the sides, this has the function, through the incision in the inner part of a wind rose, to be able to adjust the position of 360 ° of the power system of liquid. This property is especially useful for systems with mesh, as a way to match the roll of mesh, with the button on the NoName, when we go to use the mesh will always soaked of eliquid and therefore have a better supply of liquid.
Electronic switch
Now we move on to the switch and the button. The electronic part of the Big Battery compostada is a portion of the steel pipe, with a key always in steel (or brass) that presses on the electronic button that is located on the inside and locked at the bottom by a threaded ring in derlin, and only for the first Bigbattery products in the upper part by an adhesive plastic with a central hole, then this adhesive during assembly it was decided to delete it. swich as already mentioned before does not regulate the voltage, but has the sole function of ignition or less than BB, but this leads to a better conductivity, or rather a better reaction in the activation of the button. the circuit in the upper part has a small screw that has the task of portre the positive to the top cap, while the lower part, is located the spring that will be in contact with the negative of the battery, as in this mod, the battery is positioned on the contrary, the positive downwards, and the negative upward.
Central Tube:
Immediately after the switch, there is the central tube, shaped in a different way from the rest of the BB, so as to offer a line, less smooth to BigBattery. Those who wish to have a more sober, can use (18350 mode) the sleave and the tube with logo to 18490.
Sleave and tube with logo:
Now let's talk about sleave and tubes with logo. Depending on the kit taken, you can have one sleave 316 stainless steel and a tube with logo for 18350 batteries, one sleave 316 stainless steel, and tube with logo for 18490 batteries, or two brass sleave, for 18350 and 18490 batteries.
The logo of the BB is not drawn on the tube, but is dug, in such a way that once inserted inside the sleave, it has an optical effect really nice, even more if you use the sleave brass.
Finally, since the outer tube, can turn 360 degrees, you can also decide in which direction to place the logo of BigBattery.
Lower Cap:
Now in the end, we pass to cap lower. This in the outer part, is not as smooth as in other mod, but has a groove where there is engraved the name of the BB and the serial number, this first of all, to differentiate from the line by the other mod, and more in supporting the BB vertically, there is no risk that the incision is not damaged.
In the inner part we find the pin that will make contact with the battery positive, and as security from errors of fitting the battery, there is a ring around the pin in derlin that in case of mistake will not make contact to the battery.
The review of the NoName is pretty much over, I'm using it for several days, and I personally love this BigBattery, I think it's one of the best I've ever tried, both aesthetically and in terms of performance. the system with dual pin and double adjustable cap, I think it's one of the BigBattery, more universal ever created.
Thanks for your time, greetings to all, Michael
Last edited:
