Revolution V2

[BJ43]

Seems like this model isn't a favorite with many. After seeing Phil's review I decided to get one. I just can't get into wood and may still get an Evod also or just mod one of my dna boxes. I was pleasantly surprised with the Revolution and a small mod to the juice bottle made it a true squonker without tipping.



A7, oval coil, and hemp wick.



Two squonks and ready to vape.

 

[fourthrok]

Very nice! What stopped me from embracing the Revolution V2 was the proprietary non-removable battery. Otherwise...I liked the idea of them.

 

[328somewhere]

That is really cool. I agree with fourthrok about the non-removeable battery.

 

[MasterofNone]

+1 for the battery issue. If not for that I'd be suggesting THIS. To everyone who wants to get into vaping... Slap in a bottle, pop on an atty or carto, squeeze and vape... Oh well time to start construction lol

 

[fourthrok]

+1 for the battery issue. If not for that I'd be suggesting THIS. To everyone who wants to get into vaping... Slap in a bottle, pop on an atty or carto, squeeze and vape... Oh well time to start construction lol

That's actually already available...at a reasonable price...with the Vmod!

 

[MasterofNone]

Well, reasonable... I guess so. Still a little pricy to send someone to straight away. May scare them off

I mean, I might pay the money if I can't satisfactorily make my own, but can you imagine some one saying to you when you were a new vaper, " yea it'll just be 80 dollars, plus juice..."

 

[_more_]

Wait for their sales and get one. Sometimes they have a half off sale.

Well, reasonable... I guess so. Still a little pricy to send someone to straight away. May scare them off

I mean, I might pay the money if I can't satisfactorily make my own, but can you imagine some one saying to you when you were a new vaper, " yea it'll just be 80 dollars, plus juice..."

 

[BJ43]

Very nice! What stopped me from embracing the Revolution V2 was the proprietary non-removable battery. Otherwise...I liked the idea of them.

Actually that is what attracted me. Since I am an avid RCer, I use a lot of rectangular Lipo batteries and no problem to solder in a new better one when the original fails. Also unlike the Groove it can be vaped as it is charging. So far it has worked well.

 

[Ryedan]

I've been thinking of trying a Revolution, but have no experience with bottom feeders. Does the A7 have to be modified to work on it? Are there any other RBA/RDA's I should look at for this? I'm using a AGA-T on a K100 now so am used to SS and Kanthal. Would love to try micro coils.

Many thanks for any info

 

[Cifitzu]

just bought one the other day still waiting for it in the mail. what kind of tube did you use to mod the bottle?

 

[BJ43]

I've been thinking of trying a Revolution, but have no experience with bottom feeders. Does the A7 have to be modified to work on it? Are there any other RBA/RDA's I should look at for this? I'm using a AGA-T on a K100 now so am used to SS and Kanthal. Would love to try micro coils.

Many thanks for any info

The A7 does not need to be modified. Some just prefer to drill a side air hole. The Revolution will not handle sub ohm coils.

 

[BJ43]

just bought one the other day still waiting for it in the mail. what kind of tube did you use to mod the bottle?

I used a piece of tubing from and ink reservoir of a ballpoint pen. Tried some teflon tubing but it wouldn't stay glued.

 

[Ryedan]

The A7 does not need to be modified. Some just prefer to drill a side air hole. The Revolution will not handle sub ohm coils.

Thank you! I was not planning to go sub-ohm with this. Thinking it would be a great micro coil platform at about 1.5 ohm or a bit higher and a great first BF. I am also into RC using lipo's. If you have seen the battery, any info would be appreciated.

I used a piece of tubing from and ink reservoir of a ballpoint pen. Tried some teflon tubing but it wouldn't stay glued.

Do you use CA for gluing this BJ43?

 

[tearose50]

I'd not be concerned about the non-changeable battery. It should last about a year with regular use. Not bad for about $35.

I recently read some new to me data I thought I'd pass on. Don't charge on your computer USB port --- it can be harder on the battery and lessen it's life span. It has something to do about uneven outflow of power and changes when the 'puter goes in sleep modes.

I do think the case can be popped open.....at least early versions could be. Do not recommend trying until it becomes necessary.

 

[cags]

hey, the vmod is 1/2 price this week. just saw this in the deals thread:

Thought about trying a feeder? Nows a great time to pick up a Vmod or any Vapage gear for 50% off. Coupon good for one week.

UTurn, VPro, CIG2o, VMod, Barfly...it is all 50% off

 

[Ryedan]

hey, the vmod is 1/2 price this week. just saw this in the deals thread:

Thanks cags ... done. In the end at half price I'll take the Vmod

 

[BadDaddy4007]

I know I'm late on posting to this thread but I received my Revolution last week and really like it. Granted it's not like my Vmod but ti works. When the battery finally dies on me, I know I'll have no problem replacing it. Now to see what type of rba's I can use on it. Right now I have an A7, a Vision Eternity and the inside works of a Terminator tank I'm going to try.

 

[Ryedan]

I know I'm late on posting to this thread but I received my Revolution last week and really like it. Granted it's not like my Vmod but ti works. When the battery finally dies on me, I know I'll have no problem replacing it. Now to see what type of rba's I can use on it. Right now I have an A7, a Vision Eternity and the inside works of a Terminator tank I'm going to try.

Please let us know how the Vision Eternity works for you if you try it. I have one and love it, just haven't checked it out for BF'ing yet.

 

[BadDaddy4007]

I tried it today and it worked ok, just a little hard on the draw for me, still going to work on it some more.
Don't do like I did though, I made a bone head goof. Inside the 510 connector on the mod, there is a tiny, tiny rubber tube. I guess it feeds up inside what ever device you put on it. But dumb a__ me lost mine today. So now I've got to find something that will fit. The ink holder for a fountain pen is too big, the straw off of a wd40 can is too big. I'm going to see if maybe I can find a piece of wire covering that will work. I know I will not be able to find anything common to fix it. Really ticks me off I did that too.

 

[BJ43]

In my quest for finding some RDAs that will work on a BF without modification, I came across the RUK23. It works on the Revolution and on the Vmod with a 510 extension. Interesting with a ceramic cup.

https://www.fasttech.com/products/1412706