Right idea, wrong tools

[HarpoM]

Well, this morning I made an attempt at using Capt_shay's "Mixing by weight" technique. First, after completing the mix, the taste came out pretty good. I added more PG to give me more of a throat hit, but all in all, success!

Only issue I ran into was the tools that I bought to make the mix. My scale needs an upgrade for sure. It would only measure in increments of 1g, not 1.1, 1.2, etc.... Need to find a different one to be more precise.
Second mistake was using these bottles to add the mix to: The mouth was WAY too small, so I dripped quite a bit when transferring from the York plastic bottles (Which work great btw!)
http://tinyurl.com/zlhew6f

Lastly, I need to buy larger Pipettes. I used 1 ml pipettes, which were too small to transfer the nic.

Again, very happy with the way it turned out in the end product, but could use some advise on bottles and pipettes and a scale to use.

Thank you all for your help! I look forward to more mixes in the future

Darren

 

[Fozzy71]

You can find a scale on amazon that will do 0.01g increments.

This one is often recommended - https://smile.amazon.com/gp/product...fl_title_13?ie=UTF8&psc=1&smid=A1DVPD9Q368DLM

This is the one I use but I had to also buy a 500g weight to calibrate it - https://smile.amazon.com/gp/product/B01B4KX6JQ/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1

For mixing into the bottles I use a small whiskey flask funnel or similar plastic funnel with thin tip as my hands shake.

 

[Richu75]

Wide bore unicorn are perfect for straight mixing. Fasttech has them (sku 4543100) but they are available from many online shops.

A suitable scale can also be aquired from fasttech, like sku 1075701. As for nicotine transfer, I prefer needle syringes, search 'DIY E-Liquid Injection Syringe' on, again, fasttech.

 

[HarpoM]

Thanks for the tips... I will give them a try.
Darren