Yeah, so I noticed I started getting dry hits earlier, and I squonked the REO, and the juice was coming from the BF hole, and around the corners of the "floor", not sure what the material is of it, but yeah. Not sure how I can fix this haha, any tips would be great, thanks for reading!
RM2 leaking around the corners of the "floor"?
- Thread starter oDANo
- Start date
- th_trl_thread_readers 0
- Status
Npe, not the base and atty, like the actual ceramic bottom of the RM2
Here you go. This should be helpful sorting that out. I'm going to guess your posts have become loose.
I've also noticed liquid coming up from the sides of the ceramic base when I squonk. I haven't had dry hits, but I am seeing some liquid on the surface of my reo grand surrounding the rm2. Was thinking about asking Rob if I should send it in for repairs. My posts don't seem to be loose.
Take it apart and look for something blocking the drain hole. http://www.e-cigarette-forum.com/fo...2-full-atomizer-itself-rebuild-pic-heavy.html
You should notice that a grove has been cut in the bottom of the ceramic deck and also part of the metal disc that the positive pin and post screw into. Make sure the disc has the grove towards the ceramic when you put it back together.
Pictures #3 and #5 show the metal disc installed the wrong way
The metal disc should be flipped so that the milled section is toward the ceramic
http://www.e-cigarette-forum.com/fo...2-full-atomizer-itself-rebuild-pic-heavy.html
Last edited:
- Status
