RM2 screws

[DC2]

Assuming that vaping Armageddon occurs...

The phillips screws on the RM2 I would assume can be replace if they get stripped over time?
Are they somewhat standard screws that can be purchased easily?

Thanks!
DC2

 

[Marc411]

Robert has them on the site, a buck for 2 screws

http://www.reosmods.com/index.php?option=com_virtuemart&page=shop.browse&category_id=32&Itemid=3

 

[ltrainer]

Are the screws for the RM2 the same size that holds the spring on the Grand?

 

[tmel]

If you order screws from Rob, get at least a spare magnet or 2 for your door.

You need something for those tiny screws to stick to lol

 

[SLIPPY_EEL]

M2 , 3mm it was easier for me to get some from ebay what with living across the oh so great pond, I like the grub screws but you need a hex key small enough, its smaller them 1mm

 

[Cliven]

Are the screws for the RM2 the same size that holds the spring on the Grand?

No. The spring screw is longer.
Diameter maybe.....

 

[SLIPPY_EEL]

I think the spring screw is shorter

Are the screws for the RM2 the same size that holds the spring on the Grand?

 

[SLIPPY_EEL]

hahaha I knew it was the length

No. The spring screw is longer.

 

[DC2]

M2 , 3mm

So like these then?

Amazon.com: 24 Pack of M2 x 3mm Small Laptop Screws Black Zinc Laptop Machine Screw Phillips Headá/ This screw is used on every make and model of laptop, Dell, Toshiba, Hp, Compaq,Ibm,Fujitsu,Samsung,Medion,Acer,Sony,Apple,Alienware,Gateway,Lenovo,As

 

[Cliven]

hahaha I knew it was the length

I only know cause I jacked up my spring screw on my REO re-build and checked the RM2 screw. Too short as it needs to go through the body to the spring. I've some spring screws coming in this week....

 

[yaypudding]

So like these then?

Amazon.com: 24 Pack of M2 x 3mm Small Laptop Screws Black Zinc Laptop Machine Screw Phillips Headá/ This screw is used on every make and model of laptop, Dell, Toshiba, Hp, Compaq,Ibm,Fujitsu,Samsung,Medion,Acer,Sony,Apple,Alienware,Gateway,Lenovo,As

I wouldn't use those as they could contact the top cap, and I'm not 100% on the safety of the black zinc coating. I use these, the pan head works fine.

 

[SLIPPY_EEL]

so long as they are m2, 3mm you should be ok, not sure whats the best material to get them in if there is a better, sorry I couldn't load that page my internet is so slow right now...

I wreck my screw heads pretty fast to when using heavy wired coil's, a lot of people don't like em but the grub screw seem to hold up much longer for me, you can look on ebay loads of people sell them

 

[SLIPPY_EEL]

grubs or normal Philips in m2, 3mm







argh sorry double post cus internet is playing up!!

 

[Filthy-Beast]

Spring screw are for a counter sunk hole RM2 screws are pan heads.