Rx200s having issues....

[Zeusvapes]

So I have an rx200s. I updated to current updates.

Works great in voltage mode however I keep having issues in tc.

Running an avocado with. 26/30 clapton ss build. 3mm ID 8wraps. Single coil. Comes in at. 5

It keep hitting tc immediately after pressing fire button with tc anywhere from 400-600 and watts 15-30.

It's totally random though. No rhyme or reason. Sometimes she'll hit great othertimes no vape at all due to tc. Even after letting her get cold.

Another issue is it will suddenly switch to vw mode for no reason.

Checked 510 and checked tank on another tc mod with no issues....

Bum rx200s?

Sent from my D6708 using Tapatalk

 

[MagicJosh]

I'm actually using TC right now. I love TC on the RX200S. Here is my settings. I think you need to give it more power, you're setting it to only reach 15-30 watts. You're not going to get a satisfying vape with watts that low.

 

[Zeusvapes]

Tried cranking the watts. Still have the temp protect and switch to vw mode

 

[subohmasaurus]

Are you using the latest firmware?

 

[Mowgli]

Tried cranking the watts. Still have the temp protect and switch to vw mode

What type batteries? Have they been married from the start?

 

[Zeusvapes]

Latest firmware... Brand new married from the start.

 

[Zeusvapes]

So. The plot thickens. After checking and cleaning all connections on the clapton build as well as the 510s. I did some more reading and found others with this same issue.

So I popped it on my 100wtc istick. Same issues. No power. Tping out and no atomizer.

Put in a regular single strand ss. No issues on either mod.

Now have another build with the same ss clapton wire. As of 10 drags no issue.

 

[Zeusvapes]

Running 520* and 40w. Still going strong 20 rips in

 

[Completely Average]

RX200 definitely has problems with dual coil SS builds. I've yet to find one that consistently works in mine. Running either in SS mode of one of the M settings it wants to revert to Wattage instead.

My solution was to simply stop using my RX200 for dual coil SS builds. It works great with Nickel or Titanium builds, but if I wrap dual SS coils it's going on to my VT133 instead.

 

[Zeusvapes]

Running a single coil.

So the new coil is working. However as I chain vape it keeps temp protecting out and I have to keep using the temp. Is this normal for tc?

Sent from my D6708 using Tapatalk

 

[SteveS45]

I am reading this thread to gather info in case I have any issues in the future but so far my RX200S performs the best using TC with TiNi or SS. I guess I need to try some single coils in my Grasgas though.