SAFE battery for sub ohming?? PLEASE HELP!

[jclay1192]

I ordered a Telecoping K100 MOD Set and I was wondering if the batteries that come with the standard set are good to SUB OHM i also have PINK batteries that come with the evic set.. 18650 flat top and some of these Amazon.com: Two Panasonic NCR18650B 3.7V 3400mAh Rechargeable Li-ion Batteries QTY 2: Electronics are they good for sub ohm??? cause my mech is coming today and i don't want to lose my hand trying to blow clouds

 

[cramptholomew]

The pink ones are protected, AFAIK, so they won't work. The panny's are only 10A, so they're only good for around .7ohms, for safety's sake. Also, you're more likely to lose your face, not your hand - or both. BE CAREFUL. Do you have a multimeter?

 

[jclay1192]

I have an EVIC and a MVP 2.0

the ones that come with a k100 can not sub?

 

[jclay1192]

and if none of my batteries can go to .1-.5 ohms can i get an amazon link to some 18650's that can?

 

[jclay1192]

you're more likely to lose your face, not your hand

haha i just figured since i would be holding the battery >_<

 

[Baditude]

The Panasonic NCR18650B 3400 mAh have only a 6.8 amp limit and are not a high drain battery, so NEITHER of the two batteries are appropriate or safe to use with sub-ohm coils.

The fact that you have to ask such basic information shows you are not prepared to do sub-ohm coils and have not done your homework. Sub-ohms is not like putting a clearomizer on a Twist and expect to be safe. This can be dangerous stuff if you don't know what you are doing. I am totally serious! Study the following information in the below links BEFORE you attempt to make any coils.


Cloud Chasing Can Be Dangerous

Information Resources for Your First RBA

Battery Basics for Mods: IMR or Protected? (contains a list of batteries for sub-ohm)

Deeper Understanding of Mod Batteries

Mechanical Mod Proper Usage Guide

 

[jclay1192]

The Panasonic NCR18650B 3400 mAh have only a 6.8 amp limit and are not a high drain battery, so NEITHER of the two batteries are appropriate or safe to use with sub-ohm coils.

The fact that you have to ask such basic information shows you are not prepared to do sub-ohm coils and have not done your homework. Sub-ohms is not like putting a clearomizer on a Twist and expect to be safe; this can be dangerous stuff if you don't know what you are doing. Study the following information in the below links BEFORE you attempt to make any coils.


Cloud Chasing Can Be Dangerous

Information Resources for Your First RBA

Battery Basics for Mods: IMR or Protected? (contains a list of batteries for sub-ohm)

Deeper Understanding of Mod Batteries

Mechanical Mod Proper Usage Guide

i know how to work an RBA.. ,, i understand there are limits. And yes, you are right. But I'm just asking for amazon links, and not links to TL;DR posts. Just of some good batteries to use for sub ohm. THANK YOU! .

 

[bambloo!™]

I use efest hi drain 18490's down to .3 ohms and have had no problems with overheating or over stressing, however battery life is decreased greatly.
Always check your coils and be careful!
Vape on!

 

[jclay1192]

I use efest hi drain 18490's down to .3 ohms and have had no problems with overheating or over stressing, however battery life is decreased greatly.
Always check your coils and be careful!
Vape on!

thanks for the info, i will remember that when Santa delivers my Provari. any good 18650's? (flat top) for sub ohm ofc.

 

[Truetopath]

I use an efest 30 amp 18650 1600mah. I like to have a little extra cushion for my sub ohm vaping.


CASAA member 2013

Sent from my iPhone using Tapatalk - now Free

 

[jclay1192]

Amazon.com: (2 Pieces) IMR 18650 2000mah 3.7v High Drain Li-mn Rechargeable Battery with Flat Top: Cell Phones & Accessories ?

 

[MamaTried]

i know how to work an RBA.. ,, i understand there are limits. And yes, you are right. But I'm just asking for amazon links, and not links to TL;DR posts. Just of some good batteries to use for sub ohm. THANK YOU! .

hmmm... i kinda doubt it...


anyone considering sub-ohm should already have the answers regarding batteries, not asking. sheesh...

and you want to go to .1 ohms

 

[Thrasher]

Amazon.com: (2 Pieces) 30A Sony 18650 Battery 1600mAh 3.7V High Drain US18650VTC3: Cell Phones & Accessories

 

[Baditude]

and if none of my batteries can go to .1-.5 ohms can i get an amazon link to some 18650's that can?

This is not the time or place to try to save money on cheap batteries. Batteries are the most important part of your setup. Since I'd like to see you keep all of your teeth, I'll give you a link to an appropriate battery:

Orbtronic18650 22 amp SX22

 

[ArcaneMolaMola]

This thread might help you, this guy actually made a sub ohm battery chart. Now as for whether you can find all of these on Amazon, not sure, I don't sub-ohm.

http://www.e-cigarette-forum.com/fo...cussion/496926-new-sub-ohm-battery-chart.html

Edit: Cool, even Baditude ^^ found an error.

 

[Baditude]

Amazon.com: (2 Pieces) IMR 18650 2000mah 3.7v High Drain Li-mn Rechargeable Battery with Flat Top: Cell Phones & Accessories ?

No

 

[Thrasher]

No

scary innit?

 

[Baditude]

i know how to work an RBA.. ,, i understand there are limits. And yes, you are right. But I'm just asking for amazon links, and not links to TL;DR posts. Just of some good batteries to use for sub ohm. THANK YOU! .

I gave you a list of appropriate batteries that you can google for links. If you're too lazy to do that, I'm done holding your hand. Vape safe.

 

[Cr0tchF4i]

Q- Do you have a multimeter?

A...I have a vamo.



Enough said.

 

[jclay1192]

This is not the time or place to try to save money on cheap batteries. Batteries are the most important part of your setup. Since I'd like to see you keep all of your teeth, I'll give you a link to an appropriate battery:

Orbtronic18650 22 amp SX22

assuming should never be done my good sir! I have a lot of money in amazon e-cards so i was wondering, if possible, i could purchase it on there LOL! Thanks for worrying about my financial standings though. I tend to be thirfty, not cheap.