I have an Aegis solo. Great mod. But the screw in battery door is problematic. The threads in the mod side began to strip despite carefully turning counter clockwise each time to seat the cap.
Some people mentioned removing the o ring to get deeper purchase on the threads. This gave me an idea, which worked great in my case.
The centre contact on the door protrudes slightly. I carefully filed this down flush with the inner edge of the cap and voila, I can now screw in slightly deeper to catch good threads. To my knowledge no one else has suggested this fix, which is permanent unlike the hammer on the side "fix" which only lasts until the mod opening is forced back to round by the cap being screwed in repeatedly.
I hope this works for some of you. Good luck.
Some people mentioned removing the o ring to get deeper purchase on the threads. This gave me an idea, which worked great in my case.
The centre contact on the door protrudes slightly. I carefully filed this down flush with the inner edge of the cap and voila, I can now screw in slightly deeper to catch good threads. To my knowledge no one else has suggested this fix, which is permanent unlike the hammer on the side "fix" which only lasts until the mod opening is forced back to round by the cap being screwed in repeatedly.
I hope this works for some of you. Good luck.
